GE Lighting

Use this GE 13 watt BR40 LED as a direct, energy saving replacement for an 85 watt BR40 incandescent.

Energy Star qualified.

See the document below for complete specifications.

Use this GE PAR38 as an energy saving, long life direct replacement for a 120 watt PAR38 halogen.

This GE 65731 is a 18W LED PAR38 5000K .

The GE 26806 BR30 indoor spotlight is ideal for use in directional fixtures such as recessed can lighting where a narrow, more focused beam of light is desired.

This GE 68184 is a 26W LED PAR38 E26 (Medium) Base - 3000K.

Use this GE 6 watt LED as a direct replacement for 40 watt incandescent light bulbs.

Dimmable.

Energy Star qualified.

Use this GE 10 watt, medium base LED as a direct replacement for 60 watt incandescent equivalent light sources.

GE 71434. See PDF for complete specs.

MVR400HOR/ED28PA - Horizontal +/-75 - Enclosed Fixture

This GE 73404 is a 12W LED A21 5000K .

45R20/RVL. GE 73439 Reveal. Neodymium coating filters out yellow wavelength light resulting in a blue, daylight appearing illumination.

GE240RS-MV-N-DIY, 120V - 277V Program Rapid Start Electronic Ballast.

Lamps: F34T12, F40T12 (1-2 lamps).

Wiring Type: Parallel

Power Factor: Normal

Dimensions: 9.5L x 1.3W x 1.2H

GE260IS-MV-N-DIY, 120V - 277V Program Instant Start Electronic Ballast.

Lamps: F48T12, F96T12 (1-2 lamps).

Wiring Type: Parallel

Power Factor: Normal

Dimensions: 9.5L x 1.7W x 1.2H

This GE 75091 is a 18W LED PAR30LN 3000K .

Use this GE 5.5 watt, medium base LED as a direct replacement for 40 watt incandescent / halogen equivalent light sources where very cool white light is desired. Especially useful in applications requiring short bulb length.

Priced and shipped as a 3-Pack.

Use this GE 9 watt, medium base LED as a direct replacement for 60 watt incandescent / halogen equivalent light sources where very cool white light is desired. Especially useful in applications requiring short bulb length.

Priced and shipped as a 3-Pack.

Use this GE 12 watt, medium base LED as a direct replacement for 75 watt incandescent / halogen equivalent light sources where warm white light is desired. Especially useful in applications requiring short bulb length.

Priced and shipped as a 2-Pack.

This GE 75PAR/3FL/MINE 80316 bulb uses 75 watts and 120 volts. It has a MSPG base, and an average rated life of 2000 hours. It has a PAR38 lamp shape, and is an incandescent bulb.

Applications: mine flood. Cross reference: GE (17682).

For alternate, see Sku 106437

This GE 76290 LED12T8/DR/D2L is an LED Driver.

This GE 76318 LED12T8/DR/D4L is an LED Driver.

This GE 788 43117 bulb uses 20 watts and 6 volts. It has a G4 base, and an average rated life of 100 hours. It has a T2.75 lamp shape, and is a halogen bulb.

GE 788 bulb applications: ophthalmic, microscope.

Use this 26 watt compact fluorescent as an energy saving, direct replacement for 100 watt incandescent bulbs with a standard medium base.

The warm color temperature and strong color rendering create illumination that will match the existing incandescent installation.

Excellent for commercial and institutional applications.

Use this Energy Star rated GE PAR30 15 degree spot as an energy saving, long life direct replacement for a 90 watt PAR30 spot halogen.

With a center beam candlepower of 9400cd, this lamp provides the lumen intensity, precise beam and strong color rendering required for some museum, gallery and high end retail applications.

See the document below for complete specifications.

Use this Energy Star rated GE PAR30 as an energy saving, long life direct replacement for a 90 watt PAR30 halogen.

Use this Energy Star rated GE PAR30 as an energy saving, long life direct replacement for a 90 watt PAR30 halogen.

Use this Energy Star rated GE PAR30 as an energy saving, long life direct replacement for a 90 watt PAR30 halogen.

Use this Energy Star rated GE PAR30 as an energy saving, long life direct replacement for a 90 watt PAR30 halogen.

This GE 85085 is a 18W LED PAR38 3500K .

Use this GE 10 watt LED retrofit downlight to replace the reflector / trim of an existing 6" aperture, 50 / 60 watt incandescent or halogen downlight.

See the document below for complete specifications.

FLE14/2/TC16/SWCD BULB. GE 85384

Use this GE 80W LED lamp as a direct replacement for existing 250 watt HID lamps being operated by M58, M138 or M153 ANSI ballasts.

Uses existing fixture optics and ballast (Pulse or Probe Start).

Does not work on reactor or electronic ballasts.

This GE 88141 LED18T8/DR/D2L is an LED Driver.

This GE HPL575/C 120V 88436 bulb uses 575 watts and 120 volts. It has a G9.5 base, and an average rated life of 300 hours. It has a T6 lamp shape, and is a halogen bulb.

GE 88436 HPL Quartzline Showbiz.

This GE 88810 is a 32W LED PAR38 3000K .

GE 88921 - UNIVERSAL 20078

Use this 4 watt, 120 volt GE MR16 LED as a direct replacement for a 20 watt halogen MR16 with a GU10 base and matching beam spread.

See the document below for complete specifications.

This GE 90PAR/HIR/FL40XL is an infrared conserving halogen bulb with a longer average rated life than the equivalent standard halogen.

This GE 92934 is a 18W LED PAR38 3000K .

This GE 92963 is a 18W LED PAR38 3000K .

This GE 92967 is a 18W LED PAR38 3000K .

This GE LED11G24D-V/827 10.5 watt G24D 2 pin base LED is a direct replacement for existing 18 watt and 26 watt 2-pin CFL lamps. Simply remove the CFL lamp and replace with the LED lamp. No tools or rewiring required.

Features include:

• Magentic ballast compatible
• Vertical mounting
• Rated for enclosed or open fixtures
• CRI 80
• 50,000 hour rated life
• RoHS compliant

See the document below for complete specifications and ballast compatibility.

This GE 93171 is a 18W LED PAR38 4000K .

This GE 93327 is a 7W LED PAR20 3000K .

This GE 93347 is a 7W LED PAR20 3000K .

Use this GE PAR20 as an energy saving, long life direct replacement for a 50 watt PAR20 halogen.

Use this GE PAR20 as an energy saving, long life direct replacement for a 50 watt PAR20 halogen.

The GE 93896, GE140RS120-DIY rapid start electronic ballast is designed for use with 1-lamp, 3 ft. or 4 ft. T12 fluorescent fixtures.

Features include:

• Voltage: 120V
• Wattage: 30W, 40W
• Min. start temperature: 0° F
• Thermal Protection
• Energy Efficient

This GE 94385 LED21T8/DR/2L is an LED Driver is an LED Driver designed for two lamp GE 21W LED T8 ballast bypass with external driver type installations.

The GE LED12G24Q-V/830 is part of the GE family of LED replacements for 4 pin CFL bulbs. These LED bulbs can directly replace the CFL bulbs if the existing ballast is electronic. No tools or upgrades required.

GE's advanced optics eliminate wasted light to deliver a more targeted beam with fewer lumens. The result is a more energy efficient, longer life alternative to CFL.

See the document below for complete specifications and ballast compatibility.

The GE LED12G24Q-V/827 is part of the GE family of LED replacements for 4 pin CFL bulbs. These LED bulbs can directly replace the CFL bulbs if the existing ballast is electronic. No tools or upgrades required.

GE's advanced optics eliminate wasted light to deliver a more targeted beam with fewer lumens. The result is a more energy efficient, longer life alternative to CFL.

See the document below for complete specifications and ballast compatibility.

F18DBX/835/ECO GE 97600 Low mercury, TCLP compliant.

This GE 277 volt instant start electronic ballast is suitable for F32T8, 1-lamp or 2-lamp fixtures.

Features include:

• 1-Lamp: F32T8, F32T8U, F40T8
• 2-Lamp: F32T8, F32T8U, F24T8U, F25T8, F25T12, F17T8
• Voltage: 277
• Input Watts: 35
• Power Factor:  >.90
• Ballast Factor: 1.03
• THD: <25%
• Min. Start Temp: 0°F
• Dimensions: 9.5" L x 2.4" W x 1.55" H

Ge 3,4 Lamp T8 High Ballast Factor (1.18) Instant Start, High Efficiency Balla

Priced individually, GE Packaging is 10/Box

This GE BFX BFX bulb with ANSI code BFX uses 4 volts and 0.75 amps. It has a prefocus base, and an average rated life of 50 hours. It has a S8 lamp shape, and is an incandescent bulb.

GE BFX bulb. Osram Sylvania. Excitersound reproducer photocell lamp.

This halogen bulb with ANSI code BVW uses 16.7 amps, 120 volts, and 2000 watts. It has a T11 lamp shape, and P40S base. The BVW bulb has an average rated life of 200 hours.

This GE pulse start 20 watt PAR20 ceramic metal halide lamp over crisp illumination in a 25° beam distribution.

Use this lamp in open fixture applications such as track or recessed accent lighting installations.

See the document below for complete specifications.

This GE Constant Color pulse start 39 watt PAR20 ceramic metal halide offers a 25° beam distribution with good color quality illumination.

The lamp is open fixture rated allowing use in track and recessed fixture installations.

See the document below for complete specifications.

This GE EGTQ1000T74CL 88622 bulb with ANSI code EGT uses 1000 watts and 120 volts. It has a G22 base, and an average rated life of 250 hours. It has a T7 lamp shape, and is a halogen bulb.

EGT bulb is used in equipment from Altman, Arri and Strand.

GE ELC lamp applications: projectors, photo enlargers, illuminators for fiberoptic equipment. Note: center screen illuminance 1500 lux. American DJ Topaz 250 Light.

Possible substitute: EJL (less light, less heat).

The GE brand ELE bulb is used in 8mm, slide and film strip projection applications.

ENH-GE bulb applications: projection and medical equipment. Cross Reference: Ushio (1000333), GE (38686), Osram Sylvania (54986), Philips (31621-6).

EXX bulb. Applications: enlargers, video. Cross Reference: Ushio (1000422), GE (11750).

Possible substitute: EZK (less light, more life, less heat, 3200K).

This GE cool white Starcoat T8 fluorescent lamp produces 725 mean lumens at an efficacy of 55 lumens per watt.

This lamp works with a magnetic, pre-heat ballast.

F15T8/PL/AQ. GE 49892.

F17T8/SPX41/CVG, GE 41113, Cov-R-Guard Teflon coating.

This GE F18DBXT4/SPX41 is a discontinued item. Availability limited to current stock.

This GE 18 watt, 4 pin triple tube fluroescent lamp can be used in recessed downlights and other fixtures to provide cool white illumination.

This GE F32TBX/841/A/ECO 97632 bulb uses 32 watts and 120 volts. It has a GX24Q-3 base, and an average rated life of 17000 hours. It has a T4 lamp shape, and is a fluorescent bulb.

F32TBX/SPX41/A/4P. TCLP compliant.

F42TBX/827/A/ECO. Low mercury (TCLP compliant). GE 97633.

GE active spaces daylight circline fluorescent bulbs provide a cooler tone for an energetic environment. Use in rooms and spaces where cool, bluish light is desired.

This GE 66863 GELD1DMVE350SL constant current (350mA) LED driver features:

• Leads converter (USA version)
• Plastic housing
• Designed for IP67
• Reinforced insulation
• Fast start-up time
• Small form factor

See the document below for complete specifications.

The LED Bright Stik illuminates spaces instantly. Its sleek cylindrical shape fits in place of 40-100 watt incandescent, halogen, and CFL. Use as a longer life, lower energy alternative to CFL.

Sold in a 3-Pack

The GE Lightech product line uses patented auto-thermal regulation (proportional dimming of the output voltage over 90C) and its self-preserving 125°C thermal cut-off.

Embedded Lightech technology makes the transformers run cool with a higher efficiency of 95% at full load:

• The electronic transformer output is automatically reduced if it accidentally overheats.
• Lightech electronic transformers can be dimmed by low cost TRIAC dimmers without producing any acoustic noise, which is a common problem for other transformers.
• Field effect transistors provide higher efficiency compared to the usual bipolar transistors. The higher efficiency results in both smaller size and longer life.

Primary application for the LET-75W-GW: 12 volt halogen; compatible with some 12V LED lamps (check with LED manufacturer).

Dimensions: 2.09"L x 1.29"W x 0.78"H

See the document below for complete specifications for the Lightech LET-75W-GW.

The GE LET-105W-12V-RSL Lightech low volt transformer uses patented auto-thermal regulation (proportional dimming of the output voltage over 90C) and its self-preserving 125°C thermal cut-off.

Embedded Lightech technology makes the transformers run cool with a higher efficiency of 95% at full load:

• The electronic transformer output is automatically reduced if it accidentally overheats.
• Lightech electronic transformers can be dimmed by low cost TRIAC dimmers without producing any acoustic noise, which is a common problem for other transformers.
• Field effect transistors provide higher efficiency compared to the usual bipolar transistors. The higher efficiency results in both smaller size and longer life.

See the document below for complete specifications.

The GE LET-60W-12V-LW Lightech low volt transformer uses patented auto-thermal regulation (proportional dimming of the output voltage over 90C) and its self-preserving 125°C thermal cut-off.

Embedded Lightech technology makes the transformers run cool with a higher efficiency of 95% at full load:

• The electronic transformer output is automatically reduced if it accidentally overheats.
• Lightech electronic transformers can be dimmed by low cost TRIAC dimmers without producing any acoustic noise, which is a common problem for other transformers.
• Field effect transistors provide higher efficiency compared to the usual bipolar transistors. The higher efficiency results in both smaller size and longer life.

Compatible with LED lamps with wattage between 2.5W and 60W.

See the document below for complete specifications.