LED T8 Tube

The Standard LED/T8/18W/840/IS/48/ND/STD is an 18 watt, 48 inch T8 LED direct replacement for existing instant start 30/32 watt T8 fluorescent, 4000K light bulbs.

This LED tube uses the existing instant start electronic ballast in the fluorescent fixture. Simply remove the fluorescent bulb and replace it with this LED.

Features include: universal 120-277V; 1800 initial lumens at 100 lumens per watt; color rendering index of 85 and a 50,000 hour rated life.

This is a non-dimmable LED.

See the document below for complete specifications.

This Standard 9 watt dimmable T8 replaces a 24 inch, 18 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1150 initial lumens (on a normal ballast factor ballast) with an efficacy of 128 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

See the document below for complete specifications and a list of compatible instant start ballasts.

This Standard 11 watt T8 replaces a 36 inch, 18 - 20 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1450 initial lumens (on a normal ballast factor ballast) with an efficacy of 132 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

See the document below for complete specifications and a list of compatible instant start ballasts.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

The Sylvania LEDlescent T8 Ballast-Free lamps are an energy saving alternative, designed to replace traditional fluorescent T8/T12 lamps by bypassing the existing ballast.

Engineered to operate directly on 120-277V, these lamps minimize labor and recycling costs. The lamps can be used with occupancy and vacancy sensors for enhanced energy savings.

The UL rating of the existing fixture is not voided (even when it is electrically modified) since these lamps are UL Classified (as a luminaire conversion retrofit kit) under UL standard 1598C. Note: the installer must follow the installation instructions included with the lamps for the modified fixture to retain its UL rating.

Sold only by the case - 25 lamps/case.

See the document below for complete specifications.

This Eiko 15 watt T8 LED can directly replace an existing 32 watt fluorescent T8. This LED operates on most electronic T8 instant and programmed start ballasts as well as battery backup ballasts.

Features include:

• No re-wiring required
• No socket changes (uses shunted or non-shunted sockets)
• Instantaneous full light output on startup
• NSF listed for commercial food service equipment
• Frosted glass lens reduces visual glare
• Suitable for use in totally enclosed fixtures

See the document below for complete specifications.

This Eiko 11.5 watt T8 LED can directly replace an existing 32 watt fluorescent T8. This LED operates on most electronic T8 instant and programmed start ballasts as well as battery backup ballasts.

Features include:

• No re-wiring required
• No socket changes (uses shunted or non-shunted sockets)
• Instantaneous full light output on startup
• NSF listed for commercial food service equipment
• Frosted glass lens reduces visual glare
• Suitable for use in totally enclosed fixtures

See the document below for complete specifications.

This GE 35913 is a 15W LED T8 G13 Base - 6500K.

This item is a Green Creative brand 28404 13T8/4F/850/DIR. It is a 4 ft. T8 Tube 13W - DIRect Ballast Compatible - 25 pack only.

This Green Creative T8 LED is a ballast bypass type retrofit for existing 17 watt T8 fluorescent installations. The lamp operates directly of 120V or 277V line voltage. Installation requires bypass re-wiring around the ballast or removing the ballast from the fixture.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the document below for complete specifications.

This item is a Green Creative brand 28415 8T8/2F/840/BYP. It is a 2 ft. T8 Tube 8W - BYPass 120-277V - 25 pack only.

This Green Creative T8 LED is a ballast bypass type retrofit for existing 17 watt T8 fluorescent installations. The lamp operates directly of 120V or 277V line voltage. Installation requires bypass re-wiring around the ballast or removing the ballast from the fixture.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the document below for complete specifications.

This Green Creative T8 LED is a ballast bypass type retrofit for existing 17 watt T8 fluorescent installations. The lamp operates directly of 120V or 277V line voltage. Installation requires bypass re-wiring around the ballast or removing the ballast from the fixture.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the document below for complete specifications.

This Green Creative T8 LED is a plug and play, direct replacement for existing 32 watt T8 fluorescent installations. It is compatible with Instant Start and Programmed Start ballasts and requires no rewiring during installation. Simply replace the existing fluorescent tubes with these energy saving, long life LEDs.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the documents below for complete specifications.

This Green Creative T8 LED is a plug and play, direct replacement for existing 32 watt T8 fluorescent installations. It is compatible with Instant Start and Programmed Start ballasts and requires no rewiring during installation. Simply replace the existing fluorescent tubes with these energy saving, long life LEDs.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the documents below for complete specifications.

This Green Creative T8 LED is a plug and play, direct replacement for existing 17 watt T8 fluorescent installations. It is compatible with Instant Start and Programmed Start ballasts and requires no rewiring during installation. Simply replace the existing fluorescent tubes with these energy saving, long life LEDs.

This lamp features a very high lumen/watt, full system efficacy.

Other features include a frosted glass body and extra wide beam design.

The innovative glass design and compact light engine produce 310° of evenly diffused light. In addition, the micro-designed driver allows for a smaller end cap allowing end-to-end lighting with no dark spots.

See the documents below for complete specifications.

LTF Lighting's 15 watt T8 LED produces 1950 lumens of 5000K cool white illumination. Light output is equivalent to a 26 watt T8 fluorescent. Lumen maintenance at 5 years is equal to or greater than 80 percent. UL and DLC Listed.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 9 watt LED T8 replaces traditional 18 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.