LED Drivers

12 Volt Plug In Diver With Rocker Switch, 12 Watt Capacity

3-12W (non-dimming), 4-12W (dimming applications)

12V PLUG-IN DRIVER, SWITCH,6'LEAD W/ TERM BLK,1-12W,C/UL/US.

12V DC constant voltage plug-in driver, Class 2 100-120V AC, 60Hz input via 6ft power cord with rocker switch 6ft lead with terminal block, triac compatible (only), c/UL/us Listed for dry locations Replace power cord with supply wire via built-in terminal block for hardwire applications.

3-12W (non-dimming), 4-12W (dimming applications).

Fulham T1A1UNV105P-60F WorkHorse LED - Single Channel - DALI Dimming LED Driver - Universal Voltage Input - Programmable 250-1050mA Constant Current Output - 60W Max - Compact Case w/ End Terminals - IP60.

Fulham T1UNV024V-150L ThoroLED - Single Channel - Non-Dimmable LED Driver - Universal Voltage input - 24V DC Constant Voltage Output - 150W Max - IP67.

This GE 38970 LED15T8/DR/UN/2L is an LED driver for GE Type C ballast bypass 13 watt T8 and T5 linear tubes.

This GE 38974 LED15T8/DR/D2L is an LED driver for GE Type C ballast bypass 13 watt T8 and T5 linear tubes.

This GE 38975 LED15T8/DR/D4L is an LED driver for GE Type C ballast bypass 13 watt T8 and T5 linear tubes.

This GE 60041 LED21T8/DR/D2L is an LED Driver.

This GE 62030 LED21T8/DR/D4L is an LED Dimming Driver designed for four lamp GE 21W LED T8 ballast bypass with external driver type installations.

This GE 76290 LED12T8/DR/D2L is an LED Driver.

This GE 76318 LED12T8/DR/D4L is an LED Driver.

This GE 88141 LED18T8/DR/D2L is an LED Driver.

This GE 94385 LED21T8/DR/2L is an LED Driver is an LED Driver designed for two lamp GE 21W LED T8 ballast bypass with external driver type installations.

This GE 66863 GELD1DMVE350SL constant current (350mA) LED driver features:

• Leads converter (USA version)
• Plastic housing
• Designed for IP67
• Reinforced insulation
• Fast start-up time
• Small form factor

See the document below for complete specifications.

This Hatch LC50-1400Z-UNV-T constant current driver is engineered with a wide forward voltage range to accomodate popular LED loads.

See the document below for complete specifications.

10W Max, 350mA Output, 7.5-30Vdc, Fixed Output

10W Max, 380mA Output, 6.5-28Vdc, Fixed Output