Interior

This American Lighting undercabinet modular LED fixture offers dimmable illumination, a low profile housing and glare-free lens design.

Easily link adjacent fixture via inline connector or jumper (sold separately, See Related Products below).

Power supplied either via hardwire or AC plug-in power cord (sold separately, See Related Products below).

Features include:

• Dimensions: 12-1/4""L x 3-5/8""W x 15/16""D
• No hot spots for a uniform lens brightness
• Powder coated aluminum housing is sturdy and durable
• Acrylic lens diffuses light evenly over the work area
• Power input on the side for easy cord or jumper connections
• Captive screws for quick mounting and matching covers hide mounting holes
• Quick access door on back speeds installation - no need to open the wiring compartment

See the douments below for complete specifications and installation.

12 Inch Linking Cable For Led Complete Series, Black

Jumper (linking) cables with male/female connectors for LED ACL2 series undercabinet fixtures.

Luc Series Dark Bronze 16.5-Inch Led Under Cabinet Light

Dimmable with most incandescent, CFL/LED and low voltage electronic dimmers (check minimum load requirements)

16 in DK BRZ LED UC,16 LEDS,6W,3000K,120V c/ETL/us,ENERGY STAR.

Economical, bright and practical LED undercabinet with curved acrylic lens design and tool-free access to wiring compartment.

Dimmable with most incandescent, CFL/LED and low voltage electronic dimmers (check minimum load requirements).

Cool operation and high light output - LED Contrax fixtures deliver up 850 lumens per fixture.

Low profile housing hides easily - less than 1"" high.

3528 LEDs offer a CRI 82+ and 35,000 hours rated life.

Steel housing with powder coat finish is sturdy and durable.

Full length acrylic lens diffuses light evenly over the work area.

Multiple connection points hold PC board firmly against heat sink, optimizing heat dissipation and extending LED life.

Modular design with hardwire junction boxes, power cords and linking cables sold separately offers maximum flexibility and optimal fixture placement.

The Nicor NUC-3-30-WH is a 30 inch x 3.5 inch, 10.72 watt LED undercabinet fixture that provides warm white light and low operating temperatures.

With a thin 1 inch profile to keep the fixture unobtrusive, the LEDs in these undercabinet fixtures have a 50,000 hour rated life.

Features include: fully dimmable to 10 percent on most TRIAC dimmers, ON/OFF rocker switch and 120V line voltage (no transformer).

For complete specifications and installation instructions, see the documents below.

This is a Title 24 product.

1/24-PK 4"" 12W DIMMABLE DISK LIGHT -WHITE .

An easy-to-install downlight solution for new construction as well as retrofit applications, Topaz's surface mount LEDs are offered in standard 4"" or 6"" sizes and are designed to be mounted to most standard 4"" J-boxes. Perfect for residential or commercial applications including bathrooms, closets, storage areas, hallways and living areas, they offer exceptional color rendering of 90 CRI and are available in 3000K and 4000K color temperatures. Dimmable down to 5% with standard incandescent or LED style leading edge dimmers, their optical design provides a wide beam greater than 105° with low glare. With a life rating of at least 47K hours, these fixtures greatly minimize the cost of ownership through reduced maintenance and lower utility costs. California Title 24 and ENERGY STAR Listed, these fixtures are wet location rated.

1/24-PK 6"" 15.5W DIMMABLE DISK LIGHT -WHITE .

An easy-to-install downlight solution for new construction as well as retrofit applications, Topaz's surface mount LEDs are offered in standard 4"" or 6"" sizes and are designed to be mounted to most standard 4"" J-boxes. Perfect for residential or commercial applications including bathrooms, closets, storage areas, hallways and living areas, they offer exceptional color rendering of 90 CRI and are available in 3000K and 4000K color temperatures. Dimmable down to 5% with standard incandescent or LED style leading edge dimmers, their optical design provides a wide beam greater than 105° with low glare. With a life rating of at least 47K hours, these fixtures greatly minimize the cost of ownership through reduced maintenance and lower utility costs. California Title 24 and ENERGY STAR Listed, these fixtures are wet location rated.

Technical Consumer Products specializes in energy efficient fluorescent fixtures. Technical Consumer Products specializes in energy efficient fluorescent fixtures. This flush mount ceiling fixture in a classic style includes a 27 watt CFL bulb for 100 watt incandescent equivalent light.

Alc Series White Hard Wire Box For Alc Series

HARDWIRE BOX FOR ALC SERIES, WHITE, INCL 3/8 CABLE CONN.

Hardwire junction box 6-3/8""L x 3-5/8""W x 1""H power connection ports On/Off rocker switch c/ETL/us Listed, dry.

3 Foot Cool White 6400 Kelvin Led Flexible Rope Light Kit With Mounting Clips

Line voltage kits are economical - no drivers needed

3-Foot Cool White LED Flexbrite Rope Light Kit with Mounting Clips, 120 Volt, 1/2-Inch Diameter.

Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.

Line voltage kits are economical - no drivers needed.

3mm LEDs at 1"" spacing emit up to 34 lumens per foot.

Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply).

Suitable for indoor and outdoor use.

Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light.

1"" LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series).

Use clips to hold in place for most indirect view installations.

Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging.

Easy to install - kits interconnect and plug into standard 120V AC receptacles.

30 Foot Cool White 6400 Kelvin Led Flexible Rope Light Kit With Mounting Clips

Line voltage kits are economical - no drivers needed

30-Foot Cool White LED Flexbrite Rope Light Kit with Mounting Clips, 120 Volt, 1/2-Inch Diameter.

Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.

Line voltage kits are economical - no drivers needed.

3mm LEDs at 1"" spacing emit up to 34 lumens per foot.

Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply).

Suitable for indoor and outdoor use.

Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light.

1"" LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series).

Use clips to hold in place for most indirect view installations.

Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging.

Easy to install - kits interconnect and plug into standard 120V AC receptacles.

3 Foot Warml White Led Flexible Rope Light Kit With Mounting Clips

Line voltage kits are economical - no drivers needed

3-Foot Warml White LED Flexbrite Rope Light Kit with Mounting Clips, 120 Volt, 1/2-Inch Diameter.

Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.

Line voltage kits are economical - no drivers needed.

3mm LEDs at 1" spacing emit up to 34 lumens per foot.

Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply).

Suitable for indoor and outdoor use.

Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light.

1"" LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series).

Use clips to hold in place for most indirect view installations.

Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging.

Easy to install - kits interconnect and plug into standard 120V AC receptacles.

Luc Series White 6-Inch Linking Cable

6 in LINKING CABLE FOR LUC FIXTURES, WHITE.

Jumper (linking) cables for LED Contrax with male/female connectors c/ETL/us Listed, dry.

OMNI SINGLE PUCK,12VDC, 3.2W,72"" CABLE,MATTE BK.

Durable low voltage steel puck lights in three finishes emit 2700K Warm White LED light with an 85 CRI.

Warm White LEDs (2700K) use only 3.2 watts, saving 85% versus conventional 20 watt incandescent puck lights.

Each puck delivers over 140 lumens - over twice as bright as xenon puck lights.

Dimmable with 15-100% light control (puck quantity and dimmer type depend upon driver used).

Kits include a dimming driver (PS-12-12VPI with connection block instead of terminal block) and three pucks.

Zinc alloy LED housing with aluminum heat sink.

Stamped steel surface collar with Nickel or powder coat painted finish for White and Black.

Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place.

Polycarbonate lens diffuses light.

Surface mount or recess mount (2-1/4"" cut-out).

Kits are designed for plug-in installations, controlled by rocker switch on power cord; hardwired installations are controlled by wall switch or dimmer.

OMNI SINGLE PUCK,12VDC, 3.2W,72""CABLE, NICKEL.

Durable low voltage steel puck lights in three finishes emit 2700K Warm White LED light with an 85 CRI.

Warm White LEDs (2700K) use only 3.2 watts, saving 85% versus conventional 20 watt incandescent puck lights.

Each puck delivers over 140 lumens - over twice as bright as xenon puck lights.

Dimmable with 15-100% light control (puck quantity and dimmer type depend upon driver used).

Kits include a dimming driver (PS-12-12VPI with connection block instead of terminal block) and three pucks.

Zinc alloy LED housing with aluminum heat sink.

Stamped steel surface collar with Nickel or powder coat painted finish for White and Black.

Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place.

Polycarbonate lens diffuses light.

Surface mount or recess mount (2-1/4"" cut-out).

Kits are designed for plug-in installations, controlled by rocker switch on power cord; hardwired installations are controlled by wall switch or dimmer.

Horizontal Louvre Faceplate, Stainless Steel

Five faceplate styles in three finishes

HORIZTONAL LOUVRE FACEPLATE FOR SGL-LED, STAINLESS STEEL.

HORIZONTAL LOUVRE (Stainless Steel).

Five faceplate styles in three finishes.

Warm White 3200K or Blue LED light modules do not build up heat and eliminate routine lamp replacements.

Save over 85% in running costs (1.5W LED versus 10W incandescent).

Blue or Warm White light engines are sold separately from faceplates to optimize inventory investment.

Sealed light engine is rated for wet locations (IP65).

No proprietary rough-in kit required - the LED Step Light mounts to a standard depth single gang junction box (watertight gasket for single gang box is included).

Connect sets of LED Step Lights to a branch circuit and use a wall switch for On/Off control.

Convenient 7"" 18AWG lead wires speed installation.

Led Inner Square Step Light, 120 Volt Operation, 1 Watt, 3000 K, Matte White, Cetlus

Mini stair-step grooves bounce light into the space while the white acrylic lens softens and diffuses the LED light

INNER SQUARE STEP LT,120V,1W,3000K,MATTE WHITE,cETLus.

With a built-in wiring compartment, there is no need for a rough-in box. Easy to install with 120V supply wiring, this sleek recessed step light provide a no-glare, modern look.

Mini stair-step grooves bounce light into the space while the white acrylic lens softens and diffuses the LED light.

Fifteen Warm White LEDs with 85+ CRI create pools of incandescent-like light without shadows or cutoffs.

Three finishes available.

Galvanized steel junction box attached to die-cast aluminum faceplate with steel spring clips.

Removable j-box cover plate opens to spacious wiring compartment with built-in knockouts and built-in strain relief side clamps.

Recess mount to drywall via 2-3/8""W x 2-5/8""H cut-out .

Install multiples to single branch circuit by pulling "