Photographic

This BLC 21409-GEL EFP is a photo lamp that uses 12 volts and 100 watts. It has an ANSI code of EFP.

This BLC 60537-KLS EZF/EZJ is a photo lamp that uses 68 volts and 225 watts. It has an ANSI code of EZF/EZJ.

This BLC 60556-GEL DNF is a photo lamp that uses 21 volts and 150 watts. It has an ANSI code of DNF.

This Topbulb 500/99/IF bulb uses 500 watts and 130 volts. It has a E39 mogul base, and an average rated life of 2000 hours. It has a PS35 lamp shape, and is an incandescent bulb.

500/99/IF BULB.

This Ushio BAH, INC115V-300W 1000024 bulb with ANSI code BAH uses 300 watts and 115 volts. It has a E26 medium base, and an average rated life of 20 hours. It has a A21 lamp shape, and is an incandescent bulb.

BAH bulb.

Possible substitute: BBA (less light, less life, less heat).

This BLC 62342-KLS JCR 12V-100W 10H/5-2 is a photo lamp that uses 12 volts and 100 watts. It has an ANSI code of JCR 12V-100W 10H/5-2.

EBV bulb. Cross reference: Ushio (1000263).

Possible substitute: ECT (less light, more life, 3200K).

This GE ECT 40568 bulb with ANSI code ECT uses 500 watts and 120 volts. It has a E26 medium base, and an average rated life of 60 hours. It has a PS25 lamp shape, and is an incandescent bulb.

ECT lamp.

Possible substitute: EBV (more light, less life, 3400K).

This Eiko BBA bulb uses 250 watts and has an average rated life of 3 hours.

BBA bulb applications: photoflood.

This Eiko brand bulb with ANSI code EBW uses 500 watts and 115/120 volts. It is a blue PS25 lamp with inside frost and an E26 medium base. It has 10,500 initial lumens, and an average rated life of 6 hours.

This Eiko 00100 BFK/BFL 750W 120V T20 clear bulb with a top frosted coating and a medium prefocus flanged single contact base provides consistent, quality illumination. Applications include AV/photo lamp and projector lamp.

This Eiko brand bulb with an ANSI code of EBV uses 500 watts and 115/120 volts. It is a PS25 shape lamp with an E26 medium base, and is inside frosted. This photoflood has 17,000 initial lumens, and has an average rated life of 7 hours.

This Eiko brand bulb with an ANSI code of ECT is a photoflood that uses 500 watts and 120 volts. It is a PS25 shape, frosted bulb, with an E26 medium base. It has 13,650 initial lumens, and an average rated life of 60 hours.

This FT/EP302 bulb is a flashtube that uses 400 watts and 400 volts.

Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

Intended Markets: Residential, Commercial

Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.Use outdoors only in enclosed fixtures or where lamp is protected from exposure to water. Use only in fixtures rated for this product.Operate in a horizontal position only.

Intended Markets: Residential, Commercial

This Eiko PH/211 3663 bulb uses 75 watts and 120 volts. It has a E26 medium base, and an average rated life of 200 hours. It has a A21 lamp shape, and is an incandescent bulb.

PH/211 BULB.

The FCS bulb is a 24 volt, 150 watt halogen projection lamp with a G6.35 bipin base.

Inside the clear quartz T4 shape glass is an FC6 filament which produces 4500 initial lumens. The bulb operating position is vertical (with 45°) base down.

The FCS is found in a wide range of applications including photo enlargers, photo floods, microscopes, medical equipment, microfilm readers and projectors.

Cross reference brands and part numbers: Ushio 1000492, GE 13598), Philips 20607-8, Osram 64640 HLX.

Possible substitute: FDV (less light, more life, less heat).