Rope/Tapelight

This American Lighting undercabinet modular LED fixture offers dimmable illumination, a low profile housing and glare-free lens design.

Easily link adjacent fixture via inline connector or jumper (sold separately, See Related Products below).

Power supplied either via hardwire or AC plug-in power cord (sold separately, See Related Products below).

Features include:

• Dimensions: 12-1/4""L x 3-5/8""W x 15/16""D
• No hot spots for a uniform lens brightness
• Powder coated aluminum housing is sturdy and durable
• Acrylic lens diffuses light evenly over the work area
• Power input on the side for easy cord or jumper connections
• Captive screws for quick mounting and matching covers hide mounting holes
• Quick access door on back speeds installation - no need to open the wiring compartment

See the douments below for complete specifications and installation.

12 Inch Linking Cable For Led Complete Series, Black

Jumper (linking) cables with male/female connectors for LED ACL2 series undercabinet fixtures.

Luc Series Dark Bronze 16.5-Inch Led Under Cabinet Light

Dimmable with most incandescent, CFL/LED and low voltage electronic dimmers (check minimum load requirements)

16 in DK BRZ LED UC,16 LEDS,6W,3000K,120V c/ETL/us,ENERGY STAR.

Economical, bright and practical LED undercabinet with curved acrylic lens design and tool-free access to wiring compartment.

Dimmable with most incandescent, CFL/LED and low voltage electronic dimmers (check minimum load requirements).

Cool operation and high light output - LED Contrax fixtures deliver up 850 lumens per fixture.

Low profile housing hides easily - less than 1"" high.

3528 LEDs offer a CRI 82+ and 35,000 hours rated life.

Steel housing with powder coat finish is sturdy and durable.

Full length acrylic lens diffuses light evenly over the work area.

Multiple connection points hold PC board firmly against heat sink, optimizing heat dissipation and extending LED life.

Modular design with hardwire junction boxes, power cords and linking cables sold separately offers maximum flexibility and optimal fixture placement.

The Nicor NUC-3-30-WH is a 30 inch x 3.5 inch, 10.72 watt LED undercabinet fixture that provides warm white light and low operating temperatures.

With a thin 1 inch profile to keep the fixture unobtrusive, the LEDs in these undercabinet fixtures have a 50,000 hour rated life.

Features include: fully dimmable to 10 percent on most TRIAC dimmers, ON/OFF rocker switch and 120V line voltage (no transformer).

For complete specifications and installation instructions, see the documents below.

This is a Title 24 product.

Alc Series White Hard Wire Box For Alc Series

HARDWIRE BOX FOR ALC SERIES, WHITE, INCL 3/8 CABLE CONN.

Hardwire junction box 6-3/8""L x 3-5/8""W x 1""H power connection ports On/Off rocker switch c/ETL/us Listed, dry.

3 Foot Cool White 6400 Kelvin Led Flexible Rope Light Kit With Mounting Clips

Line voltage kits are economical - no drivers needed

3-Foot Cool White LED Flexbrite Rope Light Kit with Mounting Clips, 120 Volt, 1/2-Inch Diameter.

Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.

Line voltage kits are economical - no drivers needed.

3mm LEDs at 1"" spacing emit up to 34 lumens per foot.

Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply).

Suitable for indoor and outdoor use.

Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light.

1"" LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series).

Use clips to hold in place for most indirect view installations.

Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging.

Easy to install - kits interconnect and plug into standard 120V AC receptacles.

30 Foot Cool White 6400 Kelvin Led Flexible Rope Light Kit With Mounting Clips

Line voltage kits are economical - no drivers needed

30-Foot Cool White LED Flexbrite Rope Light Kit with Mounting Clips, 120 Volt, 1/2-Inch Diameter.

Easy to use, flexible, dimmable LED rope light in Cool White and Warm White. Kits interconnect to build your own semi-custom CSA or UL Listed solution.

Line voltage kits are economical - no drivers needed.

3mm LEDs at 1"" spacing emit up to 34 lumens per foot.

Dimmable with most electronic low voltage and LED/CFL dimmers* (minimum loads may apply).

Suitable for indoor and outdoor use.

Each kit includes removable five foot power cord with 1.6A inverter and fused 120V AC 2-prong plug, removable cap on opposite end and 1 clip per foot of light.

1"" LED spacing in clear UV inhibited PVC housing with 3mm LEDs wired in series parallel (36 LEDs per series).

Use clips to hold in place for most indirect view installations.

Clear plastic track should be used for direct view installations and when mounting to the underside of a shelf or ledge to prevent sagging.

Easy to install - kits interconnect and plug into standard 120V AC receptacles.

Luc Series White 6-Inch Linking Cable

6 in LINKING CABLE FOR LUC FIXTURES, WHITE.

Jumper (linking) cables for LED Contrax with male/female connectors c/ETL/us Listed, dry.

OMNI SINGLE PUCK,12VDC, 3.2W,72"" CABLE,MATTE BK.

Durable low voltage steel puck lights in three finishes emit 2700K Warm White LED light with an 85 CRI.

Warm White LEDs (2700K) use only 3.2 watts, saving 85% versus conventional 20 watt incandescent puck lights.

Each puck delivers over 140 lumens - over twice as bright as xenon puck lights.

Dimmable with 15-100% light control (puck quantity and dimmer type depend upon driver used).

Kits include a dimming driver (PS-12-12VPI with connection block instead of terminal block) and three pucks.

Zinc alloy LED housing with aluminum heat sink.

Stamped steel surface collar with Nickel or powder coat painted finish for White and Black.

Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place.

Polycarbonate lens diffuses light.

Surface mount or recess mount (2-1/4"" cut-out).

Kits are designed for plug-in installations, controlled by rocker switch on power cord; hardwired installations are controlled by wall switch or dimmer.

OMNI SINGLE PUCK,12VDC, 3.2W,72""CABLE, NICKEL.

Durable low voltage steel puck lights in three finishes emit 2700K Warm White LED light with an 85 CRI.

Warm White LEDs (2700K) use only 3.2 watts, saving 85% versus conventional 20 watt incandescent puck lights.

Each puck delivers over 140 lumens - over twice as bright as xenon puck lights.

Dimmable with 15-100% light control (puck quantity and dimmer type depend upon driver used).

Kits include a dimming driver (PS-12-12VPI with connection block instead of terminal block) and three pucks.

Zinc alloy LED housing with aluminum heat sink.

Stamped steel surface collar with Nickel or powder coat painted finish for White and Black.

Spring steel clips secure housing into surface collar with a snap-fit, and retain recessed pucks securely in place.

Polycarbonate lens diffuses light.

Surface mount or recess mount (2-1/4"" cut-out).

Kits are designed for plug-in installations, controlled by rocker switch on power cord; hardwired installations are controlled by wall switch or dimmer.

Mounting clips and screws designed to secure 12V rope and tape lights.

This 12V power supply and controller operates Standard Products color changing, RGB rope and tape lights. Power supply plugs into 120V outlet.

Cord length is 6.56 feet.

These clips are designed for wall mounting LED rope light. Screws are included.

This 5 foot power cord connects Standard brand LED rope lights to a 120 volt outlet. The power cord is rated for outdoor use and is UL Listed.