Search
All Categories
    Menu Close

    Ceiling Mount

    View as Grid List
    Sort by
    Display per page
    odc05-mdw.jpg

    Leviton ODC05-MDW | Ceiling Mount Occupancy Sensor - Photocell - PIR / Ultrasonic - 500 Sq. St.

    102182

    The Leviton Provolt™ Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

    ODC05-MDW Description: Product Line: Provolt™, Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 0500 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 180, Grade: Commercial, Color: White, Title 24 Compliant: Yes

    Features and Benefits:

    • Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
    • Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
    • Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
    • Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
    • Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
    • False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
    • Time delay and saved settings are protected during power outages and will return to the last known state
    • Output short circuit protection
    • Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
    • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
    • Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
    • Test Mode for simplified commissioning
    • Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
    • Industry-exclusive ""fail-safe"" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
    • Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service
    • Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
    • Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
    • Red Visual LED indicator - Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
    • Green Visual LED indicator - Blinks when U/S is detected; solid during auto calibration
    • Yellow Visual LED indicator - Blinks during test mode; solid with emergency/BMS input
    $114.95
    + -
    odc10-mdw.jpg

    Leviton ODC10-MDW | Ceiling Mount Occupancy Sensor - Photocell - PIR / Ultrasonic - 1000 Sq. Ft.

    702128

    The Leviton Provolt™ Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

    ODC10-MDW Description: Product Line: Provolt™, Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 1000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Grade: Commercial, Color: White, Title 24 Compliant: Yes

    Features and Benefits:

    • Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
    • Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
    • Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
    • Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
    • Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
    • False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
    • Time delay and saved settings are protected during power outages and will return to the last known state
    • Output short circuit protection
    • Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
    • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
    • Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
    • Test Mode for simplified commissioning
    • Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
    • Industry-exclusive ""fail-safe"" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
    • Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service
    • Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
    • Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
    • Red Visual LED indicator - Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
    • Green Visual LED indicator - Blinks when U/S is detected; solid during auto calibration
    • Yellow Visual LED indicator - Blinks during test mode; solid with emergency/BMS input
    $142.85
    + -
    odc20-mdw.jpg

    Leviton ODC20-MDW | Ceiling Mount Occupancy Sensor - Photocell - PIR / Ultrasonic - 2000 Sq. Ft.

    750387

    The Leviton Provolt™ Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

    ODC20-MDW Description: Product Line: Provolt™, Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 2000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Grade: Commercial, Color: White, Title 24 Compliant: Yes

    Features and Benefits:

    • Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
    • Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
    • Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
    • Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
    • Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
    • False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
    • Time delay and saved settings are protected during power outages and will return to the last known state
    • Output short circuit protection
    • Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
    • Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
    • Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
    • Test Mode for simplified commissioning
    • Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
    • Industry-exclusive ""fail-safe"" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
    • Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today’s high inrush electronic ballast loads and offer unmatched durability and service
    • Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
    • Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
    • Red Visual LED indicator - Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
    • Green Visual LED indicator - Blinks when U/S is detected; solid during auto calibration
    • Yellow Visual LED indicator - Blinks during test mode; solid with emergency/BMS input
    $151.15
    + -
    osc04-i0w.jpg

    Leviton OSC04-I0W | Ceiling Mount Occupancy Sensor - 450 Sq. Ft. - PIR

    701771

    The Leviton all-digital & microprocessor based OSCxx-I series occupancy sensor is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install & forget.”

    OSC04-I0W Description:

    Technology: Passive Infrared, Mount: Ceiling, Coverage Range Sq. Ft.: 0450 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Requires Power Pack (sold separately, see Related Products below)

    Control Specifications:

    • Adjustment: Self-Adjusting
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Timer Factory Preset: 10 Minutes
    • Sensitivity Adjustment: 0 to 100 Pct
    • Sensitivity Factory Preset: Infrared 75 Pct
    • Photo Cell Adjustment: 20 to 3000 Lux
    • Photocell Factory Preset: 3000 Lux (disable photocell)
    • LED Disable: LEDS Enable/LEDS Disable

    Electrical Specifications:

    • Input Voltage: 24VDC
    • Current Consumption: 10mA
    • Output Voltage: 24VDC w/Short Circuit Protection
    • Load Rating: Uses Power Pack (See Related Products on this page)
    $68.09
    + -
    osc10-m0w.jpg

    Leviton OSC10-M0W | Ceiling Munt Occupancy Sensor - PIR / Ultrasonic - 1000 Sq. Ft.

    701936

    Leviton occupancy sensors provide the most advanced sensor available. This OSC10-M0W combines multi-technology with all-digital architecture. Eliminates false triggering. The result is a trouble-free, “install and forget” solution for lighting control.

    Description OSC10-M0W:

    Technology: Multi-Technology PIR/Ultrasonic, Mount: Ceiling, Coverage Range Sq. Ft.: 1000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Power Pack (sold separately): See Related Products below.

    Control Specifications:

    • Adjustment: Self-Adjusting
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Timer Factory Preset: 10 Minutes
    • Sensitivity Adjustment: 0 to 100 Pct
    • Sensitivity Factory Preset: Ultrasonic 50 Pct Infrared 75 Pct
    • Photo Cell Adjustment: 20 to 3000 Lux
    • Photocell Factory Preset: 3000 Lux (disable photocell)
    • Single/Multi-Tech Mode: Switchable ON/OFF PIR/ULTRA
    • LED Disable: LEDS Enable/LEDS Disable

    Electrical Specifications:

    • Input Voltage: 24VDC
    • Current Consumption: 35mA
    • Output Voltage: 24VDC w/Short Circuit Protection
    • Load Rating: Uses Power Pack (see Related Products on this page)

    Mechanical Specifications:

    • Sensor Technology: PIR/Ultrasonic 40kHz
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 1000 Sq. Ft.
    • Major Motion Area: 46X23 Feet
    • Minor Motion Area: 34X17 Feet
    • Photo Cell: Ambient Override ON

    Product Features:

    • Adjustment: Self-Adjusting
    • Sensor Technology: PIR/Ultrasonic 40kHz
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 1000 Sq. Ft.
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Load Rating: Uses Power Pack
    • Input Voltage: 24VDC
    • Current Consumption: 35mA
    • Photo Cell: Ambient Override ON
    • Color: Off-white
    • Standards and Certifications: CUL/US Cert
    • Warranty: 5-Year Limited
    • Housing Material: High-Impact, Injection Moulded Plastic
    • Code Compliance: California Title 24
    • CUL/US: Listed 9034
    • ANCE: Compliant
    • NOM: 057
    • Code Compliance: California Title 24
    • ASHRAE: Standard 90.1 Compliant
    • FCC: Compliant
    $107.46
    + -
    osc15-i0w.jpg

    Leviton OSC15-I0W | Ceiling Mount Occupancy Sensor - PIR - 1500 Sq. Ft.

    102184

    The Leviton all-digital & microprocessor based OSCxx-I series occupancy sensor is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install & forget.”

    OSC15-I0W Description:

    Technology: Passive Infrared, Mount: Ceiling, Coverage Range Sq. Ft.: 1500 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white. Power Pack (sold separately): See Related Products below.

    Control Specifications:

    • Adjustment: Self-Adjusting
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Timer Factory Preset: 10 Minutes
    • Sensitivity Adjustment: 0 to 100 Pct
    • Sensitivity Factory Preset: Infrared 75 Pct
    • Photo Cell Adjustment: 20 to 3000 Lux
    • Photocell Factory Preset: 3000 Lux (disable photocell)
    • LED Disable: LEDS Enable/LEDS Disable

    Electrical Specifications:

    • Input Voltage: 24VDC
    • Current Consumption: 10mA
    • Output Voltage: 24VDC w/Short Circuit Protection
    • Load Rating: Uses Power Pack (see Related Products on this page)

    Mechanical Specifications:

    • Sensor Technology: Passive Infrared
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 1500 Sq. Ft.
    • Major Motion Area: 50 Foot Diameter
    • Minor Motion Area: 20 Foot Diameter
    • Photo Cell: Ambient Override ON

    Product Features:

    • Technology: Passive Infrared
    • Adjustment: Self-Adjusting
    • Sensor Technology: Passive Infrared
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 1500 Sq. Ft.
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Load Rating: Uses Power Pack
    • Input Voltage: 24VDC
    • Current Consumption: 10mA
    • Photo Cell: Ambient Override ON
    • Color: Off-white
    • Standards and Certifications: CUL/US Cert
    • Warranty: 5-Year Limited
    • Housing Material: High-Impact, Injection Moulded Plastic
    • Code Compliance: California Title 24
    $68.09
    + -
    osc20-m0w.jpg

    Leviton OSC20-M0W | Ceiling Mount Occupancy Sensor - PIR / Ultrasonic - 2000 Sq. Ft.

    702760

    Leviton occupancy sensors provide the most advanced sensor available. This OSC20-M0W combines multi-technology with all-digital architecture. Eliminates false triggering. The result is a trouble-free, “install and forget” solution for lighting control.

    Description OSC20-M0W:

    Technology: Multi-Technology PIR/Ultrasonic, Mount: Ceiling, Coverage (Sq.Ft.): 2000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Power Pack (sold separately): see Related Products below.

    Control Specifications:

    • Adjustment: Self-Adjusting
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Timer Factory Preset: 10 Minutes
    • Sensitivity Adjustment: 0 to 100 Pct
    • Sensitivity Factory Preset: Ultrasonic 50 Pct Infrared 75 Pct
    • Photo Cell Adjustment: 20 to 3000 Lux
    • Photocell Factory Preset: 3000 Lux (disable photocell)
    • Single/Multi-Tech Mode: Switchable ON/OFF PIR/ULTRA
    • LED Disable: LEDS Enable/LEDS Disable

    Electrical Specifications:

    • Input Voltage: 24VDC
    • Current Consumption: 35mA
    • Output Voltage: 24VDC w/Short Circuit Protection
    • Load Rating: Uses Power Pack (see Related Products on this page)

    Mechanical Specifications:

    • Sensor Technology: PIR/Ultrasonic 32kHz
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 2000 Sq. Ft.
    • Major Motion Area: 64X32 Feet
    • Minor Motion Area: 45X23 Feet
    • Photo Cell: Ambient Override ON

    Product Features:

    • Adjustment: Self-Adjusting
    • Sensor Technology: PIR/Ultrasonic 40kHz
    • Pattern Degrees: 360
    • Coverage (Sq.Ft.): 2000 Sq. Ft.
    • Manual Time Adjustment: 30s-30m, 6s Test Mode
    • Load Rating: Uses Power Pack
    • Input Voltage: 24VDC
    • Current Consumption: 35mA
    • Photo Cell: Ambient Override ON
    • Color: Off-white
    • Standards and Certifications: CUL/US Cert
    • Warranty: 5-Year Limited
    • Housing Material: High-Impact, Injection Moulded Plastic
    • Code Compliance: California Title 24
    • CUL/US: Listed 9034
    • ANCE: Compliant
    • NOM: 057
    • Code Compliance: California Title 24
    • ASHRAE: Standard 90.1 Compliant
    • FCC: Compliant
    $106.95
    + -