LED T8 U-Bent

This GE 13W T8 LED U-Bent tube converts a T8 fluorescent fixture to LED by bypassing the existing ballast and operating from a remote driver (purchased separately, see Related Products below).

This type of T8 conversion features:

• Glass tube
• Optimal system compatibility between LED tube and driver
• Best system efficacy
• Controllable dimming capability
• UL Type C

See the document below for more information about GE UL Type C ballast bypass T8 LED tubes.

This Green Creative 16 watt U-bent LED is a direct replacement for a 32 watt U-bent fluorescent. Achieve 50% energy savings and get longer lamp life by switchting to LED.

With plug-n-play, instant start ballast compatibility, the installation is as simple as pulling out the old fluorescent and installing the new LED in the same sockets.

Get end-to-end and 320° wide beam light distribution.

This lamp is suitable for use in totally enclosed fixtures.

See the document below for complete specifications.

This 17 watt T8 U-Bent with 6 inch leg spacing is a direct replacement for a 4000K color temperature, 32 watt T8 fluorescent U-Bent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T8 with this energy saving, long life LED

Initial lumen output by ballast power factor:

• LBF = 2050 lumens
• NBF = 2370 lumens
• HBF = 3080 lumens

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL Listed.

See document below for complete specifications.

13T8/U1-G13/LED/830/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1800 Lumens; 3000K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

13T8/U1-G13/LED/835/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1800 Lumens; 3500K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

13T8/U1-G13/LED/840/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1900 Lumens; 4000K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

This 17 watt T8 U-Bent with 1-5/8 inch leg spacing is a direct replacement for a 4000K color temperature, 31 watt T8 fluorescent U-Bent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T8 with this energy saving, long life LED

Initial lumen output by ballast power factor:

• LBF = 2050 lumens
• NBF = 2370 lumens
• HBF = 3080 lumens

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL Listed.

See document below for complete specifications.