LED T8 Tube

The Standard LED/T8/18W/840/IS/48/ND/STD is an 18 watt, 48 inch T8 LED direct replacement for existing instant start 30/32 watt T8 fluorescent, 4000K light bulbs.

This LED tube uses the existing instant start electronic ballast in the fluorescent fixture. Simply remove the fluorescent bulb and replace it with this LED.

Features include: universal 120-277V; 1800 initial lumens at 100 lumens per watt; color rendering index of 85 and a 50,000 hour rated life.

This is a non-dimmable LED.

See the document below for complete specifications.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This Standard 9 watt dimmable T8 replaces a 24 inch, 18 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1150 initial lumens (on a normal ballast factor ballast) with an efficacy of 128 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

This 9 watt LED T8 replaces traditional 18 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This Standard 11 watt T8 replaces a 36 inch, 18 - 20 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1450 initial lumens (on a normal ballast factor ballast) with an efficacy of 132 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

See the document below for complete specifications and a list of compatible instant start ballasts.

This 15 watt LED T8 replaces traditional 30 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 15 watt LED T8 replaces traditional 30 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

The Standard LED/T8/22W/835/IS/48/ND/STD is a 22 watt, 48 inch T8 LED direct replacement for existing instant start 32 watt T8 fluorescent, 3500K light bulbs.

This LED tube uses the existing instant start electronic ballast in the fluorescent fixture. Simply remove the fluorescent bulb and replace it with this LED.

The Sylvania LEDlescent T8 Ballast-Free lamps are an energy saving alternative, designed to replace traditional fluorescent T8/T12 lamps by bypassing the existing ballast.

Engineered to operate directly on 120-277V, these lamps minimize labor and recycling costs. The lamps can be used with occupancy and vacancy sensors for enhanced energy savings.

The UL rating of the existing fixture is not voided (even when it is electrically modified) since these lamps are UL Classified (as a luminaire conversion retrofit kit) under UL standard 1598C. Note: the installer must follow the installation instructions included with the lamps for the modified fixture to retain its UL rating.

The Sylvania 75064 LED8T8/L24/FG/830/SUB/G6 is a glass, 24 inch T8 LED tube that is ballast compatible with instant start and select programmed rapid start (parallel-wiring) electronic T8 ballasts with input voltage of 120-277V and 347V.

See the document below for complete specifications and ballast compatibility.

The Sylvania 75116 LED17T8/L48/FG/835/SUB/G6 is a glass, 48 inch T8 LED tube that is ballast compatible with instant start and select programmed rapid start (parallel-wiring) electronic T8 ballasts with input voltage of 120-277V and 347V.

See the document below for complete specifications and ballast compatibility.