Standard Products

LED13DL6/30K/D. Dimmable to 10 percent. Energy Star Qualified. Compatible Housings (partial list): Halo (H7ICT, H7ICAT, H7T, H7RT, ET700, EI700), Capri (CR1, QL1, PR1), Juno (IC22, IC22R, IC2, TC2), Thomas (PS1), Ruud (R7, R7EIC), Lithonia (LC6), Prescolite (DBX, RMNICD, IBXHW). Call for other housings.

This incandescent bulb with ANSI code 1327 uses 2.08 amps, 12.8 volts, and 26.6 watts. It has a RP11 lamp shape, and P15s30B base. The 1327 bulb has an average rated life of 300 hours.

1482 2.70W BULB.

This 4 inch aperture remodeler recessed housing, made of industrial strength galvanized steel, is rated for both non-IC and IC (housing covered with ceiling insulation) for LED applications.

The housing's E26 medium base socket can be used with 50 watt halogen PAR20 in non-IC installations. The housing can also be used with 9 watt PAR20 LED and 7 watt PAR16 LED lamps in IC installations.

Light bulbs not included.

See the document below for complete specifications.

This Standard 40T10/F/3M/HO/130V/STD 50132 bulb uses 40 watts and 130 volts. It has a E26 medium base, and an average rated life of 5000 hours. It has a T10 lamp shape, and is an incandescent bulb.

40T10/F/130V.

The ANSI 42 bulb is used as an indicator lamp. It has a rated life of 3000 hours.

This Standard A6413 22050 bulb with ANSI code 6413 uses 12 volts and 0.42 amps. It has a S8.5D base, and an average rated life of 4100 hours. It has a T11 lamp shape, and is bulb.

Standard 22050 A6413 5T11/CL/12V/S8.5D incandescent auto bulb with C-8 filament.

This Eiko Q100W/S130V 15202 bulb uses 100 watts and 130 volts. It has a R7S base, and an average rated life of 1500 hours. It has a T2.5 lamp shape, and is a halogen bulb.

Eiko 15202, Q100T3/S130V quartz halogen with recessed single contact (R7s) base.

The Elume F39T5HO/835 offers a high lumen T5 fluorescent solution for commercial and institutional applications.

Standard 10628, F10T4/CW is a 10 watt, 1/2 inche diameter fluorescent bulb with a miniature bi-pin (G5) base.

E432T8IS120/N, 120V 60HZ Instant Start Electronic Ballast

Lamps: F17T8, F25T8, F25T8ES, F28T8ES, F30T8ES, F32T8 (3-4 lamps).

Wiring Type: Parallel

Power Factor: 0.99

Ballast Factor: Normal

Dimensions: 9.5L x 1.7W x 1.14H

Listing: UL, CUL

Cross Reference: REL-4P32-SC, B432I120RH, GE-432-MV-H, QHE 4x32T8/UNV ISN-SC

F30T8/CW uses a preheat ballast. This bulb has a color temperature of 4100K and is low mercury, TCLP compliant.

E232T8IS120-277/N, 120-277V 50/60HZ Instant Start Electronic Ballast.

Lamps: F17T8, F25T8, F25T8ES, F28T8ES, F30T8ES, F32T8, F40T8 (1-2 lamps).

• Wiring Type: Parallel
• Power Factor: 0.99
• Ballast Factor: Normal
• Dimensions: 9.5L x 1.7W x 1.14H
• Listing: UL, CUL

Cross Reference: REL-2P32-SC, B232I120RH, GE-232-MV-H, QHE 2x32T8/UNV ISN-SC, ICN2P32/N.

E232T8IS120/N, 120V 60HZ Instant Start Electronic Ballast

Lamps: F17T8, F25T8, F25T8ES, F28T8ES, F30T8ES, F32T8, F40T8 (1-2 lamps).

Wiring Type: Parallel

Power Factor: 0.99

Ballast Factor: Normal

Dimensions: 9.5L x 1.7W x 1. 14H

Listing: UL, CUL

Cross Reference: REL-2P32-SC, B232I120RH, GE-232-MV-H, QHE 2x32T8/UNV ISN-SC

E232T8IS120/L, 120V 60HZ Instant Start Electronic Ballast.

• Lamps: F17T8, F25T8, F25T8ES, F28T8ES, F30T8ES, F32T8, F40T8 (1-2 lamps).
• Wiring Type: Parallel
• Power Factor: 0.99
• Ballast Factor: Low
• Dimensions: 9.5L x 1.7W x 1.14H
• Listing: UL, CUL

Standard Products E232T8PRS120-277/N,  Program Rapid Start Electronic Ballast.

• Lamps: F32T8, F32T8/ES (25W, 28W, 30W), F25T8, F17T8, F40T8
• Number of Lamps: 1 or 2 (see specification sheet)
• Wiring Type: Series
• Input Volts: 120-277V 50/60HZ
• Power Factor: 0.99@120V, 0.97-0.98@230V
• Ballast Factor: Normal
• Dimensions: 9.5L x 1.7W x 1.14H
• Listing: UL, CUL

E296T8IS120/N, 120V 60HZ Active Instant Start Electronic Ballast

• Lamps: (1 - 2) F96T8, F96T8ES, F72T8, F40T8 
• Wiring Type: Parallel
• Power Factor: 0.99
• Dimensions: 9.5L x 1.7W x 1.14H
• Listing: UL, CUL

Download the E296T8IS120/N product data sheet below for complete specifications.

FPL18EX-N bulb, Paralight by Hosobuchi.

This Standard Products Inc gimbal satin chrome trim has a 4-7/8 inch diameter and fits all 4 inch aperture housings designed for PAR20 LED, halogen or CFL bulbs. The gimbal rotation angle is 30 degrees.

Bulb not included.

Use this trim with these housings: New Construction Non IC, New Construction IC, Remodeler.

The award winning Soraa Snap System is the first LED lamp accessory solution that is optimized to work as an integrated system.

Simply attached the Snap System accessory directly to any narrow spot Soraa lamp, the magnetic force from both the accessory and lamp will securely attached to one another and center itself.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 6-7/8"" trim diameter (6-3/16"" hole cut)
• White trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 820 initial lumens
• 67 lumens per watt
• 4000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

This 17 watt T8 U-Bent with 1-5/8 inch leg spacing is a direct replacement for a 4000K color temperature, 31 watt T8 fluorescent U-Bent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T8 with this energy saving, long life LED

Initial lumen output by ballast power factor:

• LBF = 2050 lumens
• NBF = 2370 lumens
• HBF = 3080 lumens

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL Listed.

See document below for complete specifications.

This 17 watt T8 U-Bent with 6 inch leg spacing is a direct replacement for a 4000K color temperature, 32 watt T8 fluorescent U-Bent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T8 with this energy saving, long life LED

Initial lumen output by ballast power factor:

• LBF = 2050 lumens
• NBF = 2370 lumens
• HBF = 3080 lumens

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL Listed.

See document below for complete specifications.

The Standard LED/T8/18W/840/IS/48/ND/STD is an 18 watt, 48 inch T8 LED direct replacement for existing instant start 30/32 watt T8 fluorescent, 4000K light bulbs.

This LED tube uses the existing instant start electronic ballast in the fluorescent fixture. Simply remove the fluorescent bulb and replace it with this LED.

Features include: universal 120-277V; 1800 initial lumens at 100 lumens per watt; color rendering index of 85 and a 50,000 hour rated life.

This is a non-dimmable LED.

See the document below for complete specifications.

This Standard 3 inch aperture LED downlight kit comes in a box with everything required for installation: galvanized steel housing; white gimbal trim designed for smooth, secure fit; professional grade LED light bulb; connectors, cables, clamp; hole cutting template. The kit also includes a 6W ES16 GU10 base LED bulb.

Enjoy easy installation with self-positioning screw system, wide flange to completely cover the ceiling opening, simple mounting clip system and wiring connections.

The gimbal trim Is an effective way to highlight artwork, paintings or work stations. The gimbal style adapts to changing needs. It can also provide directional light for general lighting.

This kit is suitable for both retrofit and new construction with or without insulation.

UL Listed. Energy Star Rated.

E154T5PS120-277/N, 120V-277V 60HZ Program Start Electronic Ballast.

• Lamps: F39T5, F54T5, PLL50W, PLL55W (1 lamp)
• Wiring Type: Series
• Power Factor: 0.99
• Ballast Factor: 0.72 - 0.90
• Dimensions: 11.5L x 1.34W x 1.06H
• Listing: UL, CUL

Download the E154T5PS120-277/N product data sheet below for complete specifications.

This Standard 4 inch aperture LED downlight kit comes in a box with everything required for installation: galvanized steel housing; white gimbal trim designed for smooth, secure fit; professional grade LED light bulb; connectors, cables, clamp; hole cutting template. The kit also includes a 7W PAR20 LED bulb.

Enjoy easy installation with self-positioning screw system, wide flange to completely cover the ceiling opening, simple mounting clip system and wiring connections.

The gimbal trim Is an effective way to highlight artwork, paintings or work stations. The gimbal style adapts to changing needs. It can also provide directional light for general lighting.

This kit is suitable for both retrofit and new construction with or without insulation.

UL Listed. Energy Star Rated.

Use this mounting plate low profile downlight items SP63891 and SP63893.

This item is a Standard - 6"" Round Mounting Plate - Low Profile Downlights Accessory.

This Standard 60A19/F/6M/130V/STD SM 51092 bulb uses 60 watts and 130 volts. It has a E26 medium base, and an average rated life of 6000 hours. It has a A19 lamp shape, and is an incandescent bulb.

60A19/F/6M/130V Safety Coated (Silicone) Bulb

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• Black trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 530 initial lumens
• 61 lumens per watt
• 3000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• Black trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 550 initial lumens
• 67 lumens per watt
• 4000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• Brushed nickel trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 550 initial lumens
• 67 lumens per watt
• 4000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• White trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 550 initial lumens
• 67 lumens per watt
• 4000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• Brushed nickel trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 530 initial lumens
• 61 lumens per watt
• 3000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• White trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 530 initial lumens
• 61 lumens per watt
• 3000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" trim diameter (4-3/16"" hole cut)
• White trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 510 initial lumens
• 59 lumens per watt
• 2700K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

The Standard Low Profile LED Downlight provides excellent flexibility for installations with ceiling area constraints such as wood beams, ceiling joists or air ducts.

With a thin profile and multiple drive installation options, there is no need for work-arounds or compromises. Install this downlight exactly where you want it.

Fixture features include:

• 4-3/4"" square trim (4-3/16"" hole cut)
• Brushed nickel trim finish
• Acrylic frosted lens

LED module features:

• 9 watts
• 120 volts
• 530 initial lumens
• 51 lumens per watt
• 3000K color temperature
• 80 CRI color rendering
• Dimmable (see spec download below for dimmer list)
• 40,000 hour rated life
• 42 IP rating
• 40% THD
• >0.9 power factor
• -4°F to 113°F operating temperature

This fixture is Energy Star qualified.

See documents below for complete specifications, photometrics, dimmer compatibility and installation instructions.

This Standard 9 watt dimmable T8 replaces a 24 inch, 18 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1150 initial lumens (on a normal ballast factor ballast) with an efficacy of 128 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

See the document below for complete specifications and a list of compatible instant start ballasts.

This incandescent bulb with ANSI code 112 uses 0.22 amps, 1.2 volts, and 0.26 watts. It has a TL3 lamp shape, and E10 miniature screw base. The 112 bulb has an average rated life of 5 hours.

This Standard 11 watt T8 replaces a 36 inch, 18 - 20 watt T8 fluorescent and operates directly off the existing instant start ballast (see ballast list below). Simply remove the fluorescent T8 and install this LED T8 in the same G13 sockets.

The lamp produces 1450 initial lumens (on a normal ballast factor ballast) with an efficacy of 132 lumens per watt.

Dimming capability assumes use of an appropriate dimming ballast (see ballast list below).

UL and DLC Listed.

See the document below for complete specifications and a list of compatible instant start ballasts.

This incandescent bulb with ANSI code 1251 uses 0.23 amps, 28 volts, and 6.44 watts. It has a G6 lamp shape, and BA15S base. The 1251 bulb has an average rated life of 2000 hours.

This 1835 incandescent bulb utilitzes a miniature single contact bayonet base.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This incandescent bulb with ANSI code 2233 uses 0.77 amps, 28 volts, and 21.56 watts. It has a S8 lamp shape, and BA15S base. The 2233 bulb has an average rated life of 2000 hours.

This incandescent bulb with ANSI code 246 uses 0.22 amps, 3.8 volts, and 0.84 watts. It has a TL3 lamp shape, and E10 miniature screw base. The 246 bulb has an average rated life of 20 hours.

This incandescent bulb with ANSI code 24X uses 0.035 amps, 24 volts, and 0.84 watts. It has a T2 lamp shape, and slide base. The 24X bulb has an average rated life of 8000 hours.

This incandescent bulb with ANSI code 623 uses 0.37 amps, 28 volts, and 10.4 watts. It has a G6 lamp shape, and BA15S base. The 623 bulb has an average rated life of 1000 hours.

This incandescent bulb with ANSI code 908 uses 1.5 amps, 6 volts, and 9 watts. It has a T5 lamp shape, and wedge base. The 908 bulb has an average rated life of 50 hours.

E22142-277-347-TDE-FLX, 347V 60HZ Program Start Electronic Ballast.

Lamps: PLC26W, PLL27W, PLT26W, PLT32W, PLT42W, FC9T5 (1-2 lamps); FC12T5, 2D28W, 2D38W (1 lamp).

Wiring Type: Series

Power Factor: 0.99

Ballast Factor: Normal

Dimensions: 4.92L x 12.51W x 1.14H

Listing: UL, CUL

Cross Reference: Magnetek/GE/Universal C2642/347; Robertson PSJ22

This item is a Standard brand 64399 RF6/TRIM/GMB/BLK/PAR38/STD Recessed Fixtures.

E1528-120-SL GLB, 120V 50/60HZ Instant Start Electronic Ballast.

• Lamps: T8 (13-25W), T5 (4-28W), T12 (14,15W), PL (5-13W ), PLL (18, 24W), PLT (10-26W), 2D (10-28W) - (1 lamp).
• Wiring Type: Series
• Power Factor: 0.87 - 0.91
• Dimensions: 2.0L x 1.5W x 1.0H
• Listing: UL, CUL

See E1528-120-SL GLB product data sheet below for complete specifications.

This Ushio 3000203 CF26T/827, Triple Tube is a CF26T/827, Triple Tube 26W 2700K 82CRI GX24d-3.

Ushio's Ultraline series of halogen MR16 are rated at more than twice the life of other MR16s on the market today. Refinements in the reflector coating process slows deterioration of the reflector, allowing Ultraline lamps to maintain their consistent halogen color throughout the life of the lamp.

In addition, the halogen capsule helps to protect ultraviolet sensitive objects by eliminating harmful UV emissions.

See the document below for complete specifications.

Technical note: Reinforced filament for vibration resistance. Teflon coating helps contain the glass fragments if the bulb is broken. This rough service worklight is able to withstand shock and rough handling better than a regular household bulb.

Application: automotive stop, tail, signal.

This Standard B1A T3.25/125V/0.3mA/BA9s/B1A/STD 50706 bulb uses 0.07 watts and 65 volts. It has a BA9S base, and an average rated life of 25000 hours. It has a T3.25 lamp shape, and is a neon bulb.

NE-51 neon glow. Miniature bayonet base.

This Standard 10S11/F/1M/E17/130V/STD 50165 bulb uses 10 watts and 120 volts. It has a E17 intermediate base, and an average rated life of 1500 hours. It has a S11 lamp shape, and is an incandescent bulb.

10S11N/F BULB.

Cross reference: GE (12575), Osram Sylvania (17450). Used for: photosensitization and photo chemical reaction applications

This Standard 11S14/CG/3M/130V/STD 52212 bulb uses 11 watts and 130 volts. It has a E26 medium base, and an average rated life of 2500 hours. It has a S14 lamp shape, and is an incandescent bulb.

11S14/G BULB.

This E-Lume CF11/T2/27K/SPIRAL/E26/ELUME 14139 bulb uses 11 watts and 120 volts. It has a E26 medium base, and an average rated life of 8000 hours. It has a T4 lamp shape, and is a fluorescent bulb.

Substitute for 50W incandescent.

Osram 3898 bulb. Cross reference Philips 12829.

Substitute this 9W compact fluorescent for 60W incandescent. Diameter: 2.2 inches. Produces warm, soft white light similar to a standard incandescent light bulb. Will not operate at temperatures below -20 degrees F. NOT for use with dimmers

This E-Lume CF13/T2/41K/SPIRAL/E26/ELUME 4P 61027 bulb uses 13 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T2 lamp shape, and is a fluorescent bulb.

CF13CW - substitute for 60W incandescent. Produces cool white light.

This Eiko 14 40264 bulb uses 0.74 watts and 2.47 volts. It has a E10 mini screw base, and an average rated life of 15 hours. It has a G3.5 lamp shape, and is an incandescent bulb.

14 BULB.

14 watt compact fluorescent floodlight replaces a 65 watt standard incandescent floodlight. Produces warm, soft white light similar to a standard light bulb. UL listed for indoor and outdoor use. May be used in track lights, recessed can lights and o

This Standard CF14/D/27K/SPIRALE/E26/STD 58935 bulb uses 15 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T4 lamp shape, and is a fluorescent bulb.

Substitute for 60W incandescent.

CF15/T19/27. Warm white CFL substitute for 60W incandescent. Cross reference (GE FLE20/2/T19/XL).

Compact fluorescent substitute for 60 watt incandescent. Cool white light. Minimum start temperature minus 20 degrees F.

This Standard CF15/30K/PAR30LN/E26/STD 14015 bulb uses 15 watts and 120 volts. It has a E26 medium base, and an average rated life of 8000 hours. It has a PAR30 lamp shape, and is a fluorescent bulb.

Compact fluorescent floodlight. Minimum start temperature: minus 10 degrees fahrenheit.

Compact fluorescent floodlight. Neutral white light. Minimum start temperature: minus 10 degrees fahrenheit.

This Standard 1680X S8/CL/6V/4.1A/BA15S/STD 13154 bulb with ANSI code 1680X uses 6 volts and 4.1 amps. It has a BA15S base, and an average rated life of 300 hours. It has a S8 lamp shape, and is an incandescent bulb.

Cross reference: GE (33995).

The Elume MH175W/U produces 14,000 initial lumens and has a universal operating position.

This miniature lamp acts as an indicator bulb in hand-held devices.

This Standard CF18/T2/41K/SPIRAL/E26/STD 59621 bulb uses 18 watts and 120 volts. It has a E26 medium base, and an average rated life of 12000 hours. It has a T2 lamp shape, and is a fluorescent bulb.

Substitute for 75W incandescent.

CF18DD/E/827 BULB.

F18DBX/SPX41/4P BULB.

This Standard CCFL18/27K/PAR38/25M/E26/STD 59615 bulb uses 18 watts and 120 volts. It has a E26 medium base, and an average rated life of 25000 hours. It has a PAR38 lamp shape, and is a fluorescent bulb.

Cold Cathode Technology

This Standard 200PS25/F/RS/130V/STD SM 10255 bulb uses 200 watts and 130 volts. It has a E26 medium base, and an average rated life of 3000 hours. It has a PS25 lamp shape, and is an incandescent bulb.

200PS25/F/RS/130V Safety Coated (Silicone) Bulb

This Standard 20T6.5/F/5M/BA15d//130V/STD 50679 bulb uses 20 watts and 130 volts. It has a BA15D base, and an average rated life of 5000 hours. It has a T6.5 lamp shape, and is an incandescent bulb.

Application notes: exit signs.

This E-Lume CF20/T2/27K/SPIRAL/E26/ELUME 61031 bulb uses 20 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T4 lamp shape, and is a fluorescent bulb.

Substitute for 75W incandescent.

This Standard CF20/35K/SPIRAL/E26/STD 58402 bulb uses 20 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T3 lamp shape, and is a fluorescent bulb.

Substitute for 75W incandescent.

This Standard CF18/T2/50K/SPIRAL/E26/STD 59628 bulb uses 20 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T2 lamp shape, and is a fluorescent bulb.

Substitute for 75W incandescent.

Compact fluorescent lamp substitute for 60 - 75 watt incandescent. Warm white light. Minimum start temperature: minus 10 degrees F.

The 2174 bulb utiliizes a C-2F filament. Bulb diameter is 5.1mm.

This Tcp 11323 bulb uses 23 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a A19 lamp shape, and is a fluorescent bulb.

23W A19 CFL. TCP item# 11323. Not dimmable.

This Standard CF23/T2/27K/SPIRAL/E26/ELUME 61032 bulb uses 23 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a T2 lamp shape, and is a fluorescent bulb.

Substitute for 100W incandescent.

Substitute this 23W compact fluorescent for 100 watt incandescent. Produces very bluish, white light similar to daylight. Use in table lamps, floor lamps, desk lamps, recessed and other ceiling fixtures, pendants, and outdoor porch or post top fixtures (w

This CF23/PAR38/35K/SM bulb uses 23 watts and 120 volts. It has a E26 medium base, and an average rated life of 10000 hours. It has a PAR38 lamp shape, and is a fluorescent bulb.

CF23/35K/PAR38/E26/SM BULB. Safety coated with mylar.

Compact fluorescent floodlight. Very cool white light. Minimum start temperature: minus 10 degrees fahrenheit. Energy Star rated.

Substitute this 23W compact fluorescent for 90/100W incandescent. Produces neutral white light. Use in track lights, recessed can lights and outdoor flood lights. NOT for use with dimmers.

This 2741 bulb is an incandescent lamp that uses 24 volts and 1.2 watts. It has a W2x4.6d base, and a T1.5 lamp shape. The bulb has 0.5 initial lumens, and an average rated life of 1,000 hours.

FT24DL/835 BULB.

This Standard 25A19/CL/1M/120V/STD/4P 50931 bulb uses 25 watts and 120 volts. It has a E26 medium base, and an average rated life of 1000 hours. It has a A19 lamp shape, and is an incandescent bulb.

25A/CL BULB.

This Standard 25A19/SW/1M/120V/STD BLX/2P 50921 bulb uses 25 watts and 120 volts. It has a E26 medium base, and an average rated life of 1000 hours. It has a A19 lamp shape, and is an incandescent bulb.

25A/W BULB.

This Standard 25A15/F/5M/130V/STD 50126 bulb uses 25 watts and 130 volts. It has a E26 medium base, and an average rated life of 5000 hours. It has a A15 lamp shape, and is an incandescent bulb.

25A15/F

This Standard 25A15/F/5M/130V/STD SM 46063 bulb uses 25 watts and 130 volts. It has a E26 medium base, and an average rated life of 5000 hours. It has a A15 lamp shape, and is an incandescent bulb.

25A15/F/5M/130V Safety Coated (Mylon) Bulb

This Standard 25T10/CL/3M/130V/STD 50925 bulb uses 25 watts and 130 volts. It has a E26 medium base, and an average rated life of 1500 hours. It has a T10 lamp shape, and is an incandescent bulb.

Application notes: exit signs.

This Standard 25T8/F/1.5M/BA15d/130V/STD 52199 bulb uses 25 watts and 130 volts. It has a BA15D base, and an average rated life of 1500 hours. It has a T8 lamp shape, and is an incandescent bulb.

25T8 Incandescent