Leviton

Leviton OSSMT Multi-Technology Decora Wall Switch Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications.

OSSMT-GDI Description:

Product Line: OSSMT, Technology: Multi-Technology PIR/Ultrasonic, Switch Type: Single-Pole, Mounting: Wall Switch, Device Type: Occupancy Sensor, Coverage (Sq.Ft.): 2400 Sq. Ft., Pattern: 180°, Color: Ivory, Warranty: 5-Year Limited

Leviton's new line of occupancy sensors combine state-of-the-art passive infrared technology with a new design to provide optimal management of lighting and motor loads. The energy-saving sensors are engineered to ensure that lights/motors will turn ON automatically and turn OFF automatically when motion is no longer detected within the covered range. Designed to fit in a standard wallbox, these devices offer 180° field of view and 900 sq. ft. of coverage.

IPS05-1LZ Description

• The IPV05/IPS05 is single pole, relay-based and designed to replace a single pole switch for loads such as LED, CFL, Incandescent, Fluorescent lighting and motor loads.
• The IPS05-1LZ has screw terminals for easy installation and does not require a neutral wire for connection. It features a time delay setting which allows users the option to delay the lights/motor load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes.
• White finish assembled on the device. Ivory and light almond color change kit included.

IPS05-1LZ Features

• Switch Type: Single-Pole
• Control: Auto ON, Auto OFF
• Adjustment: Manual
• Pattern Degrees: 180
• Coverage (Sq.Ft.): 900 Sq. Ft.
• Time Adjustment: 30s-30m
• Load Rating: 600W Incandescent, 150W LED and CFL
• Voltage: 120 Volt AC 60 Hz
• Neutral: Not Required
• Standards and Certifications: CUL/US
• Color: White, Ivory, Light Almond (color change kit included)
• Mounting: Fits in standard wallbox and replaces single-pole wall switch
• Warranty: 5-Year Limited

See document below for installation instructions.

This single gang, ivory wallplate from Leviton features a screwless, snap-on attachment system for a clean, contemporary look.

See the brochure below for more information on these wallplates.

This single gang, light almond wallplate from Leviton features a screwless, snap-on attachment system for a clean, contemporary look.

See the brochure below for more information on these wallplates.

This single gang, white wallplate from Leviton features a screwless, snap-on attachment system for a clean, contemporary look.

See the brochure below for more information on these wallplates.

The Leviton Decora Digital Dual Voltage Matching Dimmer Remote is designed for use with Decora Digital Dimmers in 3-way or up to 5 additional location applications.

Specifications:

• Switch Type: 3-Way or Up to 5 Location Applications
• Style Name: Decora
• Type: Digital
• Preset: Slide bar preserves desired lighting level
• Voltage: 120/277VAC, 60Hz
• LED Color: Green
• Light: LED Locator and Brightness Display
• Action: Rocker Switch for ON/OFF, slide bar for lighting level control
• Wallplate: Order Separately (see Related Products on this page)
• Color: White, Ivory, Light Almond
• Standards and Certifications: CSA, NOM, FCC
• Warranty: 5 Year Limited
• Wiring Notes: Neutral required
• Ordering Notes: Included White, Ivory and Light Almond Color Kit
• Available Colors: Ivry-I Wht-W Gry-G Blk-E Brwn-B Light Almond-T

See document below for instructions.

The next generation of lighting control technology is here with the new Leviton Decora® Digital Controls with Bluetooth® technology

This digital switch / timer can be controlled with your smartphone or tablet and the Decora Digital Dimmer & Timer app to control, adjust and time lighting for daily activities or to ensure a “lived-in" look while away.

Decora Digital Controls with Bluetooth technology provide local control within a 30 foot* range without the need of a hub, gateway or internet connection, bridging the gap between traditional dimmers and whole-house automation systems.

DDS15-BDZ Description:

Decora Digital Switch and 24 hour Timer 1800W Incandescent (120V), 15A Fluorescent (120V), 6A Fluorescent (277V), 5A 600W LED/CFL (120V), 15A Resistive (120V), 1/2 HP Motor (120V), Single Pole and 3-way/multi-location control with LED locator. White face assembled on device, Ivory and Light Almond faces included. Neutral wire required.

Leviton Decora Rocker-Slide Advance Mark 7® and Quicktronic® Helios Fluorescent Ballast Dimmers provide smooth, slide-action, full-range dimming for Flourescent loads.

They combine a Decora rocker switch with a contemporary full-range slender slide bar for precise lighting control.

With a new, streamlined style, Decora dimmers and fan speed control complement any interior design and are compatible with other Decora devices.

Features:

• New aesthetically pleasing design with rocker switch and slender dimmer control slide bar
• Integrated linear full-range slide control for easy, precise operation
• Single pole or 3-way operation (when using 3-way switch); packaged with White, Ivory, and Light Almond color change kits
• Additional color change kits available in Black, Brown, Red and Gray
• Slim, compact housing fits easily into a standard wallbox and is suitable for multi-gang installations with other Decora products
• The slide bar location preserves the selected brightness level when the dimmer is switched OFF
• No fins for multi-gang installation
• Wired using leads, a Neutral wire is not required for operation
• Built-in radio/TV interference filter

Specifications:

• Switch Type: Single-Pole & 3-Way
• Style Name: Decora
• Type: Electro-Mechanical
• Preset: Slide bar preserves desired lighting level
• Load Type: Electronic 0-10VDC Fluorescent
• Load Rating: 1200VA-120VAC, 1500VA-277VAC
• Action: Rocker Switch for ON/OFF, slide bar for lighting level control
• Protection: Radio/TV Filter
• Warranty: 5-Year Limited
• Standards and Certifications: cCSAus, NOM
• Color: White, Ivory, Light Almond
• Wallplate: Order Separately
• Ordering Notes: Included White, Ivory and Light Almond Color Kit
• Available Colors: Ivry-I Wht-W Gry-G Blk-E Brwn-B Light Almond-T, R-Red

See documents below for additional specifications and instructions.

Leviton Decora Rocker-Slide Universal Dimmers provide smooth, slide-action, full-range dimming for Incandescent, halogen, dimmable LEDs and dimmable CFL loads.

This dimmer combines a Decora rocker switch with a contemporary full-range slender slide bar for precise lighting control. With a new, streamlined style, Decora dimmers and fan speed control complement any interior design and are compatible with other Decora devices.

The dimmer ships with Ivory colored rocker switch and slide, but color change kits for White and Light Almond are also included.

The wallplate / faceplates must be ordered sparately to match the color of the rocker and slide you have chosen.

See Related Products on this page for the faceplate items.

Dimmer Features:

This Leviton fluorescent lampholder is designed for T8 lamps requiring a shunted, G13 socket.

Features:

• 660W
• 600V
• Mounting style: push fit, slide on
• Wiring method: quick connect
• Extra low profile
• Inbternal Shunt
• Lamp Axis: 16mm
• Thermoplastic body
• Copper alloy contact
• White
• Compliance: UL E5833, CSA Certified LR-1863

Mechanical Specs

• Mounting Type: Snap-In or Slide-ON
• Panel Thickness: 22-25 Ga. Panel
• Contact Type: Lamp-Lock
• Termination: Quickwire 18AWG Solid
• Wire Strip Length: 3/8 Inch

IllumaTech Preset Dimmers and Fan Speed Controls feature a low-profile fluid slide bar movement for fine adjustment of light levels or fan speeds that accompanied by an easy-to-use ON/OFF preset switch.

The switch provides quick ON/OFF control without disturbing pre-selected settings. Most feature a built-in LED locator light, as well. Models are available for incandescent, magnetic or electronic low-voltage, and Mark 10 Powerline dimming-ballast fluorescent lighting, and quiet and standard fan speed control.

Features include:

• Switch Type: Single-Pole & 3-Way
• NAFTA Compliant: Yes
• Style Name: IllumaTech
• Type: Electro-Mechanical
• Preset: Preset
• Load Type: Electronic 0-10VDC Fluorescent and 0-10VDC LED Power Supply
• Load Rating: 1200VA
• Voltage: 120/277 Volt AC 60Hz
• Light: None
• Action: Standard ON/OFF
• Protection: Radio/TV Filter
• Wallplates: Order Separately (see Related Products on this page)
• Color: White, Ivory, Light Almond
• Standards and Certifications: UL/CSA
• Warranty: 5-Year Limited
• Color Change Kit: IPKIT Series
• Ordering Notes: Incl White, Ivory and Light Almond Color Kit
• Available Color Kits: Ivry-I Wht-W Gry-G Blk-E Brwn-B Light Almond-T, R-Red

The Leviton Provolt Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

ODC05-MDW Description: Product Line: Provolt, Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 0500 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 180, Grade: Commercial, Color: White, Title 24 Compliant: Yes

The Leviton Provolt Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

ODC10-MDW Description: Product Line: Provolt Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 1000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Grade: Commercial, Color: White, Title 24 Compliant: Yes

The Leviton Provolt Series combine line voltage occupancy sensors and photocells into a self-contained unit. The integrated design alleviates the need for separate power pack and occupancy sensor wiring making it a low-cost, efficient energy solution for new construction and retrofits.

ODC20-MDW Description: Product Line: Provolt, Technology: Multi-Technology PIR/Ultrasonic, Line Voltage: Yes, Mount: Ceiling, Coverage (Sq.Ft.): 2000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Grade: Commercial, Color: White, Title 24 Compliant: Yes

The Leviton ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.

The Leviton ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.

ODS10-IDW Description:

Product Line: ODS10, Technology: Passive Infrared, Switch Type: Single-Pole, Mounting: Wall Switch, Device Type: Occupancy Sensor, Coverage (Sq.Ft.): 2100 Sq. Ft., Voltage: 120/277 Volt AC 60Hz, Pattern: 180°, Color: White, Neutral Wire Connection: Not Required, Warranty: 5-Year Limited

The Leviton OPP20 Super Duty Power Pack is the first power pack designed to control virtually any lighting or receptacle circuit load to meet todayâ„¢s challenges for solid state lighting control and tougher code requirements for unmatched performance and durability. The Power Pack models are cost-effective with simplified energy management tools for daylight harvesting and energy management.

Description of OPP20-D2:

20A Standard Power Pack for Occupancy Sensors, features include Auto ON, Manual ON, Local Switch, Latching Relay; Line Voltage Input: 120/208/220/230/240/277V, 50/60Hz; Low Voltage: Input-24VDC, 2mA, Output-24VDC, 225mA. Housing: 1/2" Threaded nipple w/locknut (fits on or in a 4" sqr box), RoHS Compliant, Title 24 Compliant, ASHRAE 90.1 Compliant, Color: Gray

The Leviton OPP20 Super Duty Power Pack is the first power pack designed to control virtually any lighting or receptacle circuit load to meet todayâ„¢s challenges for solid state lighting control and tougher code requirements for unmatched performance and durability. The Power Pack models are cost-effective with simplified energy management tools for daylight harvesting and energy management.

Description of OPP20-RD4:

20A Power Pack for Occupancy Sensors features include Auto ON, Manual ON, Local Switch, Photocell, Latching Relay; Line Voltage Input: 120/208/220/230/240/277V, 50/60Hz; Low Voltage:(24VDC)Input-2mA, Output-225mA. Housing: 1/2" Threaded nipple w/locknut (fits on or in a 4" sqr box), RoHS Compliant, Title 24 Compliant, ASHRAE 90.1 Compliant, Color: Gray

The Leviton all-digital & microprocessor based OSCxx-I series occupancy sensor is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install & forget."

OSC04-I0W Description:

Technology: Passive Infrared, Mount: Ceiling, Coverage Range Sq. Ft.: 0450 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Requires Power Pack (sold separately, see Related Products below)

Control Specifications:

• Adjustment: Self-Adjusting
• Manual Time Adjustment: 30s-30m, 6s Test Mode
• Timer Factory Preset: 10 Minutes
• Sensitivity Adjustment: 0 to 100 Pct
• Sensitivity Factory Preset: Infrared 75 Pct
• Photo Cell Adjustment: 20 to 3000 Lux
• Photocell Factory Preset: 3000 Lux (disable photocell)
• LED Disable: LEDS Enable/LEDS Disable

Electrical Specifications:

• Input Voltage: 24VDC
• Current Consumption: 10mA
• Output Voltage: 24VDC w/Short Circuit Protection
• Load Rating: Uses Power Pack (See Related Products on this page)

Mechanical Specifications:

• Sensor Technology: Passive Infrared
• Pattern Degrees: 360
• Coverage (Sq.Ft.): 0450 Sq. Ft.
• Major Motion Area: 24 Foot Diameter
• Minor Motion Area: 10 Foot Diameter
• Photo Cell: Ambient Override ON

Product Features:

• Technology: Passive Infrared
• Adjustment: Self-Adjusting
• Sensor Technology: Passive Infrared
• Pattern Degrees: 360
• Coverage (Sq.Ft.): 0450 Sq. Ft.
• Manual Time Adjustment: 30s-30m, 6s Test Mode
• Load Rating: Uses Power Pack
• Input Voltage: 24VDC
• Current Consumption: 10mA
• Photo Cell: Ambient Override ON
• Color: Off-white
• Standards and Certifications: CUL/US Cert
• Warranty: 5-Year Limited
• Housing Material: High-Impact, Injection Moulded Plastic
• Code Compliance: California Title 24

See documents below for additional specifications and instructions.

Leviton occupancy sensors provide the most advanced sensor available. This OSC10-M0W combines multi-technology with all-digital architecture. Eliminates false triggering. The result is a trouble-free, install and forget solution for lighting control.

Description OSC10-M0W:

Technology: Multi-Technology PIR/Ultrasonic, Mount: Ceiling, Coverage Range Sq. Ft.: 1000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Power Pack (sold separately)

The Leviton all-digital & microprocessor based OSCxx-I series occupancy sensor is the most advanced infrared ceiling sensor available. Self-calibrating sensitivity and timer allow the installer to “install & forget."

OSC15-I0W Description:

Technology: Passive Infrared, Mount: Ceiling, Coverage Range Sq. Ft.: 1500 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white. Power Pack (sold separately): See Related Products below.

Control Specifications:

• Adjustment: Self-Adjusting
• Manual Time Adjustment: 30s-30m, 6s Test Mode
• Timer Factory Preset: 10 Minutes
• Sensitivity Adjustment: 0 to 100 Pct
• Sensitivity Factory Preset: Infrared 75 Pct
• Photo Cell Adjustment: 20 to 3000 Lux
• Photocell Factory Preset: 3000 Lux (disable photocell)
• LED Disable: LEDS Enable/LEDS Disable

Electrical Specifications:

• Input Voltage: 24VDC
• Current Consumption: 10mA
• Output Voltage: 24VDC w/Short Circuit Protection
• Load Rating: Uses Power Pack (see Related Products on this page)

Mechanical Specifications:

• Sensor Technology: Passive Infrared
• Pattern Degrees: 360
• Coverage (Sq.Ft.): 1500 Sq. Ft.
• Major Motion Area: 50 Foot Diameter
• Minor Motion Area: 20 Foot Diameter
• Photo Cell: Ambient Override ON

Product Features:

• Technology: Passive Infrared
• Adjustment: Self-Adjusting
• Sensor Technology: Passive Infrared
• Pattern Degrees: 360
• Coverage (Sq.Ft.): 1500 Sq. Ft.
• Manual Time Adjustment: 30s-30m, 6s Test Mode
• Load Rating: Uses Power Pack
• Input Voltage: 24VDC
• Current Consumption: 10mA
• Photo Cell: Ambient Override ON
• Color: Off-white
• Standards and Certifications: CUL/US Cert
• Warranty: 5-Year Limited
• Housing Material: High-Impact, Injection Moulded Plastic
• Code Compliance: California Title 24

See documents below for additional specifications and instructions.

Leviton occupancy sensors provide the most advanced sensor available. This OSC20-M0W combines multi-technology with all-digital architecture. Eliminates false triggering. The result is a trouble-free, “install and forget" solution for lighting control.

Description OSC20-M0W:

Technology: Multi-Technology PIR/Ultrasonic, Mount: Ceiling, Coverage (Sq.Ft.): 2000 Sq. Ft., Adjustment: Self-Adjusting, Pattern Degrees: 360, Title 24 Compliant: Yes, Grade: Commercial, Color: Off-white, Power Pack (sold separately).

The Leviton OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications. The OSFHU installs directly to an industrial fluorescent luminaire or an electrical junction box. It is a self-contained sensor and relay that turns individual light fixtures on or off based on occupancy in the detection zone.

The sensor comes with three interchangeable lenses for use in either a 360-degrees high-bay or 360-degrees low-bay general area or an aisle way. The OSFHU provides reliable coverage up to 40 ft. mounting heights.

The OSFHU is also available in a model for cold storage applications with temperatures as low as -40° F. To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body. The adapter simply snaps into a 1/2-inch knockout on the end of the industrial fixture to attach the sensor.

OSFHU Description:

High-Bay Fixture Mount Occupancy Sensor, Interchangeable Adjustable 360° Low Bay and (8'-20'), High Bay (20'-40') Lenses, Aisle Mask, Passive Infrared Technology, 120/208/220/230/240/277/347V; 50/60Hz. Quick-snap threaded nipple, Instant Start-up, Return-to-last state after power outage, Auto-Sensitivity gain from temperature increase, False-detection protection, Super Bright Green LED. NAFTA Compliant. Commercial Grade - White, Title 24 Compliant, ASHRAE 90.1 Compliant

Levitons OSSMT Multi-Technology Decora Wall Switch Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications.

OSSMT-GDW Description:

Product Line: OSSMT, Technology: Multi-Technology PIR/Ultrasonic, Switch Type: Single-Pole, Mounting: Wall Switch, Device Type: Occupancy Sensor, Coverage (Sq.Ft.): 2400 Sq. Ft., Pattern: 180°, Color: White, Warranty: 5-Year Limited

The Z-MAX Digital Switches are 100% digital, using the Luma-Net protocol and are specifically designed for use with Z-MAX Lighting Control Relay Cabinets.

Z-MAX Digital Pushbutton Station, 02 Button, 1 Gang, White