LED Linear Tubes

This Maxlite 107207 L17T8DF440 is a 17W 4-FT DIRECTFIT LED T8 4000K (UL-A).

13T8/U1-G13/LED/830/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1800 Lumens; 3000K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

13T8/U1-G13/LED/835/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1800 Lumens; 3500K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

13T8/U1-G13/LED/840/DUAL

13 Watt T8 U-Bend LED; 50000 Hours; Medium bi-pin base; 1900 Lumens; 4000K; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

This 17 watt T8 U-Bent with 1-5/8 inch leg spacing is a direct replacement for a 4000K color temperature, 31 watt T8 fluorescent U-Bent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T8 with this energy saving, long life LED

Initial lumen output by ballast power factor:

• LBF = 2050 lumens
• NBF = 2370 lumens
• HBF = 3080 lumens

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL Listed.

See document below for complete specifications.

This 18 watt LED T8 replaces traditional 32 watt fluorescent T8 bulbs and operates directly off the existing instant start or program rapid start ballast.

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 27 watt T5 is a direct replacement for a 4000K, 54 watt T5 fluorescent lamp operating on any instant or program start electronic ballast. Simply replace the exisitng fluorescent T5 with this energy saving, long life LED.

A quality glass encasing allows these LED tubes to be protected against yellowing and brittleness for a long lasting retrofit application

The lamp is also shatterproof to protect employees, production and customers. A safety coating of PET Polyethylene Terephthalate helps contain glass if the lamp is broken, making it useful in a range of applications and over a broad temperature range of -4°F to 113°F.

Do not install this lamp in a pre-heat fixture.

UL and DLC Listed.

See document below for complete specifications.

This 9 watt LED T8 replaces traditional 18 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 15 watt LED T8 replaces traditional 30 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

This 15 watt LED T8 replaces traditional 30 watt fluorescent T8 bulbs and operates directly off the existing instant start, rapid start or program start ballast without any rewiring (see document below for compatible ballasts).

A quality glass encasing protects against yellowing and brittleness over the 50,000 hour life of the tube.

The integrated driver makes for easy installation and allows the fixture to keep its certification without any additional wiring.

This is a DLC rated lamp.

See the document below for complete specifications, including lumen output for low, normal and high ballast factor ballasts.

The Standard LED/T8/22W/835/IS/48/ND/STD is a 22 watt, 48 inch T8 LED direct replacement for existing instant start 32 watt T8 fluorescent, 3500K light bulbs.

This LED tube uses the existing instant start electronic ballast in the fluorescent fixture. Simply remove the fluorescent bulb and replace it with this LED.

The Sylvania LEDlescent T8 Ballast-Free lamps are an energy saving alternative, designed to replace traditional fluorescent T8/T12 lamps by bypassing the existing ballast.

Engineered to operate directly on 120-277V, these lamps minimize labor and recycling costs. The lamps can be used with occupancy and vacancy sensors for enhanced energy savings.

The UL rating of the existing fixture is not voided (even when it is electrically modified) since these lamps are UL Classified (as a luminaire conversion retrofit kit) under UL standard 1598C. Note: the installer must follow the installation instructions included with the lamps for the modified fixture to retain its UL rating.

See the document below for complete specifications.

The Sylvania 75064 LED8T8/L24/FG/830/SUB/G6 is a glass, 24 inch T8 LED tube that is ballast compatible with instant start and select programmed rapid start (parallel-wiring) electronic T8 ballasts with input voltage of 120-277V and 347V.

See the document below for complete specifications and ballast compatibility.

The Sylvania 75116 LED17T8/L48/FG/835/SUB/G6 is a glass, 48 inch T8 LED tube that is ballast compatible with instant start and select programmed rapid start (parallel-wiring) electronic T8 ballasts with input voltage of 120-277V and 347V.

See the document below for complete specifications and ballast compatibility.

25-PK 4' 25.5W(FP54/HO) FROST GLASS T5 W/PET-DLC-.

Topaz's LED Linear T5 series are the optimal plug and play solution for commercial applications, improving the quality of illumination while offering up to 40% energy savings over fluorescent sources. Ideally suited for school and office settings, Topaz T5 lamps with PET offer shatterproof coating to ensure occupant safety. With a life rating of 50,000 hours, the frosted finish T5 tube provides a glare free, end to end illumination and is compatible with program rapid start T5 ballasts.

10-PK 14W 4-FT DUAL-END BYPASS T8 5000K -DLC-.

Switch on the savings with our LED Linear T8 series. The Clear and Frosted Ballast Bypass models are ideal for T8 and T12 upgrades. Our glass construction, LED tubes utilize an internal power supply and heatsink with a 240° beam angle for glare free, evenly diffused illumination and are rated for up to 50,000 hours. Select models are DLC approved. The 2', 3', and 4' tubes cast neutral to cool white color temperatures providing improved light distribution with consistent coverage over traditional fluorescent sources.

1/20-PK 18W DLC 48"" LED T8 CLEAR 5000K UNV.

Switch on the savings with our LED Linear T8 series. The Clear and Frosted Ballast Bypass models are ideal for T8 and T12 upgrades. Our polycarbonate construction, LED tubes utilize an internal power supply and heatsink with a 240° beam angle for glare free, evenly diffused illumination and are rated for up to 50,000 hours. Select models are DLC approved. The 2', 3', and 4' tubes cast neutral to cool white color temperatures providing improved light distribution with consistent coverage over traditional fluorescent sources.

10-PK 14W 4-FT DUAL-END BYPASS T8 6500K.

Switch on the savings with our LED Linear T8 series. The Clear and Frosted Ballast Bypass models are ideal for T8 and T12 upgrades. Our glass construction, LED tubes utilize an internal power supply and heatsink with a 240° beam angle for glare free, evenly diffused illumination and are rated for up to 50,000 hours. Select models are DLC approved. The 2', 3', and 4' tubes cast neutral to cool white color temperatures providing improved light distribution with consistent coverage over traditional fluorescent sources.

12-PK 12W 4-FT FROST GLASS T8 3500K -DLC- 210deg.

Switch on the savings with Topaz 8 foot LED Linear T8 lamps. These ballast compatible plug and play models simplify installation. The tubes are offered in a frosted glass construction with shatter protection PET coating. Closely replicating the