LED CFL PIN BASE

This Green Creative 11 watt LED replaces a 26W 4-pin CFL bulb with plug-n-play, direct operation off most electronic ballasts (see compatible ballast list below).

This lamp uses ballast output control technology that allows for high performance even on lower powered ballasts.

CFL base compatibility: G24q, GX24q.

Designed to replaced vertical mount CFLs.

The 50,000 hour rated life of this LED is 4 times the typical rated life of CFLs resulting in much lower maintenance costs over the life the lamp.

Suitable for damp locations. Not intended for use in enclosed fixtures.

See the documents below for complete specifications and installation information.

This Green Creative 11 watt LED replaces a 26W 4-pin CFL bulb with plug-n-play, direct operation off most electronic ballasts (see compatible ballast list below). Simply replace the existing CFL with this LED.

With a color rendering index of 90, this LED is suitable for applications where accurate color rendering is a priority.

This lamp uses ballast output control technology that allows for high performance even on lower powered ballasts.

CFL base compatibility: G24q, GX24q.

Designed to replaced vertical mount CFLs.

The 50,000 hour rated life of this LED is 4 times the typical rated life of CFLs resulting in much lower maintenance costs over the life the lamp.

Suitable for damp locations. Not intended for use in enclosed fixtures.

See the documents below for complete specifications and installation information.

This Green Creative LED replacement for a 40W 4-pin, 2G11 base CFL is compatible with most instant and programmed start electronic ballasts. It provides a plug-n-play solution for simple replacement of existing fluorescent lamps.

Features include:

• Efficacy: 124 lm/W
• Suitable for use in totally enclosed fixtures
• Wide beam: 280° light emitting area
• 0-10V dimming

See the document below for additional information and specifications.

Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesLamp is UL approved for damp locations.

Intended Markets: Residential, Commercial

Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesLamp is UL approved for damp locations.

Intended Markets: Residential, Commercial

Order Code: 65370

Description: LED/PLH/6W/DTT/40K/G24q/ND/STD

This Sylvania 75035 LED9/PB/GX23/H/841 is a LED Pin Base, 9W 80CRI, 1100 Lumen, 4100K, 50000 life.

This Sylvania 75036 LED9/PB/GX24Q/H/835 is a LED Pin Base, 9W 80CRI, 850 Lumen, 3500K, 50000 life.

1/10/50-PK 12W G24Q-BASE LED HORIZONTAL 4000K.

LED plug-in style replacement lamps for CFL downlights are simple plug and play retrofits offering up to 50% energy savings and 5X longer life expectancy than inefficient pin based CFL lamps. Offering the latest in LED manufacturing, these lamps are designed with advanced thermal management, new generation LED chip technology and 50K hours of operation. Electronic ballast compatible, these plug-ins are available in horizontal and vertical form factors with no need to bypass an existing ballast. Applications include commercial and residential use for recessed fixtures, sconces and ceiling fixtures.