Industrial

Sort by

Display per page

Morris 11642 | Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud - 100 Case

102372

Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud - Nylon Insulated Fork/Spade Terminals for electrical work. Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud features include:. Fork/Spade Terminals are Nylon Insulated Color Coded Insulation for easy identification. Manufactured from High Strength Copper AlloyElectro-Tin Plated for corrosion resistance. Easy Entry Expanded Insulation eliminates strand “Hang Up" - increasing crimping rates and provides mechanical strain relief. Wire range stamped on the surface for easy interpretation. Terminal Barrel has Brazed Seam. Serrated Barrel provides excellent electrical contact & resistance to pull-out forces221°F (105°C) 600 Volts Max. Maximum Electric Current: 22 AWG - 9 Amp - 20 AWG - 12 Amp - 18 AWG - 17 Amp - 16 AWG - 18 Amp - 14 AWG - 30 Amp - 12 AWG - 35 Amp - 10 AWG - 50 Amp - 8 AWG - 70 Amp - 6 AWG - 95 Amp cULus Listed. Order Qty of 100 = 1 Bag of 100 Below is more info on our Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud. Nylon Insulated Fork/Spade Terminals - Nylon Insulated Fork/Spade Terminals for electrical work. Fork/Spade Terminals are Nylon Insulated. Color Coded Insulation for easy identification. Manufactured from High Strength Copper Alloy. Electro-Tin Plated for corrosion resistance. Easy Entry Expanded Insulation eliminates strand

$61.95

+ -

Morris 22586 | Nylon Cable Glands - NPT Thread - 90° 3/4"

102373

Right Angle Nylon Cable Glands NPT Thread 3/4" - These Right Angle Cable Glands are corrosion resistant.Nylon Cable Glands - NPT Thread - 90° 3/4" features include:. 90° Orientation. Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable. Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation. Threads into your panel for clearance. Internal Ratchet with Self-Locking feature protects against vibrations. Screw cable glands into NPT Thread (National Pipe Thread) Watertight design of body accommodates various size cords - cables - tubing - etc. Nylon NPT thread cable glands body material is resistant to most common chemicals & solvents. For best results - use the minimum size that fits into your cable. No disassembly required. Made of UL approved NYLON 66 - 94V-2 (Black)IP68 Rated Submersible & Dustproof. UL Recognized94V-2 Flame Rating. Temperature Rating: -22°F to 140°F. Dimension Measurements = Inches. Order Qty of 1 = 1 Piece Below is more info on our Nylon Cable Glands - NPT Thread - 90° 3/4". Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant. 90° Orientation. Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable. Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation. Threads into your panel for clearance - locknut included. Internal Ratchet with Self-Locking feature protects against vibrations. Screw cable glands into NPT Thread (National Pipe Thread). Watertight.

$12.95

+ -

Morris 23030 | Ceramic Wire Connectors #22 - #14 - 100 Case

106637

Ceramic High Temperature Wire Connectors #22 - #14 features include:

For Use in Appliances, High Power lighting, Heaters, and High Temperature applications
Excellent Heat and Electrical Resistant Properties
Working temperature up to 1000°F Maximum
Best for Applications above 200°F
White
Order Qty of 100 = 1 Bag of 100

Below is more info on our Ceramic High Temperature Wire Connectors #22 - #14

Ceramic High Temperature Wire Connectors - Our Ceramic High Temp Wire Connectors are perfect for Heaters, Appliances and other High-Wattage Situations.

For Use in Appliances, High Power lighting, Heaters, and High Temperature applications.

Excellent Heat and Electrical Resistant Properties.

Working temperature up to 1000°F Maximum.

Best for Applications above 200°F.

White.

Order Qty of 100 = 1 Bag of 100.

White. Order Qty of 100 = 1 Bag of 100 .

$49.95

+ -

Morris 31825 Cable Pulling Grips Flex Eye Med Duty .74" .98" Cable 33" Length 4750lb Max Load

102374

Cable Pulling Grips .74" - .98" Cable 33" Length 4750lb Max Load - Rotating Eye - Medium Duty - Cable Pulling Grips are Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.Cable Pulling Grips .74" - .98" Cable 33" Length 4750lb Max Load features include:. Double Weave Galvanized Steel Wire MeshAluminum Alloy Flexible Pulling EyeAppropriate for Medium Duty LoadsOrder Qty of 1 = 1 Piece Below is more info on our Medium Duty Cable Pulling Grips .74" - .98" Cable 33" Length 4750lb Max Load. Cable Pulling Grips - Rotating Eye - Medium Duty - Cable Pulling Grips are Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit. Double Weave Galvanized Steel Wire Mesh. Aluminum Alloy Flexible Pulling Eye. Appropriate for Medium Duty Loads up to 21 -700 Lbs (See Chart).

$144.95

+ -

Morris 35016 | Plastic Stacking Staples for (2) 14/2 & 12/2 - 50 Case

102375

Plastic Stacking Staples for (2) 14/2 & 12/2 - These Zinc Plated Stacking Staples won't deteriorate. Plastic Stacking Staples for (2) 14/2 & 12/2 features include:. Plastic insulated stacking staples quickly and easily secure vertical stacks of Non-Metallic cable. Electro-Zinc Plated nails provide strength and durability. Smooth saddles prevent damage to insulation. UV-protected Polyethylene saddle resists rot - rust and deterioration, 1/2" wide, white color, UL Listed. Order Qty of 50 = 1 Bag of 50 Below is more info on our Plastic Stacking Staples for (2) 14/2 & 12/2. Plastic Stacking Staples - These Zinc Plated Stacking Staples won't deteriorate. Plastic insulated stacking staples quickly and easily secure vertical stacks of Non-Metallic cable. Electro-Zinc Plated nails provide strength and durability. Smooth saddles prevent damage to insulation. UV-protected Polyethylene saddle resists rot - rust and deterioration. 1/2" wide. white color. UL Listed.

$6.95

+ -

Morris 91257 | Uninsulated Semi-Tension Neutral Service Entrance Splices Model: SNG 24 #2-#4

102383

Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4 - These High Conductivity Non-Insulated Service Entrance Splices are perfect for Electrical Service Installations

Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4 features include:

Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductors
High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound
Color Coded and marked with catalog numbers, strip lengths, installing die references and compression locations
Common Die Series
RUS Approved
ANSI C119.4 Compliant
Order Qty of 1 = 1 Piece

Below is more info on our Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4

Non-Insulated Semi-Tension Service Entrance Splices Common Die - These High Conductivity Non-Insulated Service Entrance Splices are perfect for Electrical Service Installations.

Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductors.

High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion.

Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound.

Color Coded and marked with catalog numbers, strip lengths, installing die references and compression locations.

Common Die Series.

RUS Approved.

ANSI C119.4 Compliant.

Common Die Series. RUS Approved. ANSI C119.4 Compliant.

$4.95

+ -

Nesco - 20310|L-16 connector

700516

L-16 3/8" Connector For Bx

$0.27

+ -

NSI SB1808-B | Easy-Twist Crimp Sleeve Copper - 50 Pack

102767

18-8 AWG Copper Crimp Sleeve, 500/Bag

Color: Copper

Type: Crimp Sleeve Wire Connectors

Material: Copper

$28.95

+ -

REVERSOMATIC 30" Rangehood 1000-160

700650

Range Hood 1000-160R 30" W/W

$40.93

+ -

Square D 20A Single pole bolt-on Breaker ECB14020G3

106966

ECB14020G3 - Square D 20 Amp 1 Pole 480 Volt Bolt-On Molded Case Circuit Breaker

Schneider Electric / Square D, Powerlink, type ECB-G3, 1P, 1PH, 20A, 480V, 14kA@480V, bolt-on, remotely operated, LI - Long-Time and Instantaneous trip functions, thermal magnetic

$175.00

+ -

Square D Breaker QOB380

708007

Square D Breaker Qob380

$95.05

+ -

Sunbeam Power Bar 5 Outlet With Surge Protection

707598

Power Bar 5 Outlet 2.5' 15Amp Reset Swit 3-Way/Surge Protection 120V

$10.30

+ -

Sylvania 23030 - F18T8/CW/K30, 18W 30K Appliance Fluorescent, 4200K

100246

18W, 30" MOL, T8 preheat fluorescent lamp, Cool White phosphor, 4200K color temperature, 60 CRI, appliance and vending applications

$5.99

+ -

T&B - 3302C| 2-Screw Connectors

750315

Two-Screw Conn Tnb

$2.07

+ -

T&B - C1804 | 2 Screw Connector

900969

2 Screw Connector 3/8

$0.28

+ -

T&B 52C14 | Cover 4" square single gang device raised 52C14

750507

T&B 52C14 | Cover 4" square single gang device raised 52C14

$1.20

+ -

WIRE TEW 18AWG WHT SOLD IN SPOOLS OF 300M

750138

WIRE TEW 18AWG WHT 16 STRANDS OF COPPER

$55.00

+ -

Industrial

Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4 - These High Conductivity Non-Insulated Service Entrance Splices are perfect for Electrical Service Installations

Payment options