Search
All Categories
    Menu Close

    Industrial

    View as Grid List
    Sort by
    Display per page
    spd24601.jpg

    Carlo Gavazzi SPD24601 | POWER SPLY SPD24601 60W 24VDC DIN 120/240

    750017

    Carlo Gavazzi SPD24601 | POWER SPLY SPD24601 60W 24VDC DIN 120/240

    $46.50
    + -
    zpy11.jpg

    Carlo Gavazzi ZPY11 | Relay Base 11 Pin ice cube

    750005

    Carlo Gavazzi ZPY11 | Relay Base 11 Pin ice cube

    $3.83
    + -
    BQLSX.jpg

    CURRENT INP MOD. UDM35 0-20MA-CGV

    750048
    Carlo Gavazzi BQLSX | LOW SIGNAL INPUT MODULE UDM35 0-20MA
    $110.90
    + -
    cg-bor1.jpg

    DIGIT. RLY OUTPUT MOD. UDM35 -CGV

    750049
    Carlo Gavazzi BOR1 | DIGITAL. RELAY OUTPUT MODULE BO R1
    $63.18
    + -
    NBB2-8GH20.jpg

    INDUCTIVE SENSOR 2MM RANGE

    750400
    INDUCTIVE SENSOR NBB2-8GH20-E2-V3
    $105.00
    + -
    0115116071.jpg

    M4/6 GREY TERMINAL BLOCK 24-10AWG-ABB

    750103
    011511607 DIN RAIL MOUNT TERMINAL BLOCK, 1 POSITION, 22 AWG, 10AWG, SCREW, 32A
    $0.80
    + -
    Picture of Morris 11642 | Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud - 100 Case

    Morris 11642 | Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud - 100 Case

    102372
    Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud - Nylon Insulated Fork/Spade Terminals for electrical work.Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud features include:. Fork/Spade Terminals are Nylon InsulatedColor Coded Insulation for easy identificationManufactured from High Strength Copper AlloyElectro-Tin Plated for corrosion resistanceEasy Entry Expanded Insulation eliminates strand “Hang Up” - increasing crimping rates and provides mechanical strain reliefWire range stamped on the surface for easy interpretationTerminal Barrel has Brazed SeamSerrated Barrel provides excellent electrical contact & resistance to pull-out forces221°F (105°C) 600 Volts MaxMaximum Electric Current: 22 AWG - 9 Amp - 20 AWG - 12 Amp - 18 AWG - 17 Amp - 16 AWG - 18 Amp - 14 AWG - 30 Amp - 12 AWG - 35 Amp - 10 AWG - 50 Amp - 8 AWG - 70 Amp - 6 AWG - 95 AmpcULus ListedOrder Qty of 100 = 1 Bag of 100 Below is more info on our Nylon Insulated Fork/Spade Terminals - 8 Awg Wire - #10 Stud. Nylon Insulated Fork/Spade Terminals - Nylon Insulated Fork/Spade Terminals for electrical work. Fork/Spade Terminals are Nylon Insulated. Color Coded Insulation for easy identification. Manufactured from High Strength Copper Alloy. Electro-Tin Plated for corrosion resistance. Easy Entry Expanded Insulation eliminates strand
    $61.95
    + -
    morris-22586.jpg

    Morris 22586 | Nylon Cable Glands - NPT Thread - 90° 3/4"

    102373
    Right Angle Nylon Cable Glands NPT Thread 3/4" - These Right Angle Cable Glands are corrosion resistant.Nylon Cable Glands - NPT Thread - 90° 3/4" features include:. 90° OrientationSeal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cableSimply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installationThreads into your panel for clearanceInternal Ratchet with Self-Locking feature protects against vibrationsScrew cable glands into NPT Thread (National Pipe Thread)Watertight‘Collet’ design of body accommodates various size cords - cables - tubing - etc.Nylon NPT thread cable glands body material is resistant to most common chemicals & solventsFor best results - use the minimum size that fits into your cableNo disassembly requiredMade of UL approved NYLON 66 - 94V-2 (Black)IP68 Rated Submersible & DustproofUL Recognized94V-2 Flame RatingTemperature Rating: -22°F to 140°F Dimension Measurements = InchesOrder Qty of 1 = 1 Piece Below is more info on our Nylon Cable Glands - NPT Thread - 90° 3/4". Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant. 90° Orientation. Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable. Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation. Threads into your panel for clearance - locknut included. Internal Ratchet with Self-Locking feature protects against vibrations. Screw cable glands into NPT Thread (National Pipe Thread). Watertight.
    $12.95
    + -
    morris-23030.jpg

    Morris 23030 | Ceramic Wire Connectors #22 - #14 - 100 Case

    106637

    Ceramic High Temperature Wire Connectors #22 - #14 features include:

    • For Use in Appliances, High Power lighting, Heaters, and High Temperature applications
    • Excellent Heat and Electrical Resistant Properties
    • Working temperature up to 1000°F Maximum
    • Best for Applications above 200°F
    • White
    • Order Qty of 100 = 1 Bag of 100

    Below is more info on our Ceramic High Temperature Wire Connectors #22 - #14

    Ceramic High Temperature Wire Connectors - Our Ceramic High Temp Wire Connectors are perfect for Heaters, Appliances and other High-Wattage Situations.

    For Use in Appliances, High Power lighting, Heaters, and High Temperature applications.

    Excellent Heat and Electrical Resistant Properties.

    Working temperature up to 1000°F Maximum.

    Best for Applications above 200°F.

    White.

    Order Qty of 100 = 1 Bag of 100.

    White. Order Qty of 100 = 1 Bag of 100 .

    $49.95
    + -
    morris-31825.jpg

    Morris 31825 Cable Pulling Grips Flex Eye Med Duty .74" .98" Cable 33" Length 4750lb Max Load

    102374
    "Cable Pulling Grips .74"" - .98"" Cable 33"" Length 4750lb Max Load - Rotating Eye - Medium Duty - Cable Pulling Grips are Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.Cable Pulling Grips .74"" - .98"" Cable 33"" Length 4750lb Max Load features include:. Double Weave Galvanized Steel Wire MeshAluminum Alloy Flexible Pulling EyeAppropriate for Medium Duty LoadsOrder Qty of 1 = 1 Piece Below is more info on our Medium Duty Cable Pulling Grips .74"" - .98"" Cable 33"" Length 4750lb Max Load. Cable Pulling Grips - Rotating Eye - Medium Duty - Cable Pulling Grips are Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit. Double Weave Galvanized Steel Wire Mesh. Aluminum Alloy Flexible Pulling Eye. Appropriate for Medium Duty Loads up to 21 -700 Lbs (See Chart). "
    $144.95
    + -
    morris-35016.jpg

    Morris 35016 | Plastic Stacking Staples for (2) 14/2 & 12/2 - 50 Case

    102375
    Plastic Stacking Staples for (2) 14/2 & 12/2 - These Zinc Plated Stacking Staples won't deteriorate.Plastic Stacking Staples for (2) 14/2 & 12/2 features include:. Plastic insulated stacking staples quickly and easily secure vertical stacks of Non-Metallic cableElectro-Zinc Plated nails provide strength and durabilitySmooth saddles prevent damage to insulationUV-protected Polyethylene saddle resists rot - rust and deterioration1/2” widewhite colorUL ListedOrder Qty of 50 = 1 Bag of 50 Below is more info on our Plastic Stacking Staples for (2) 14/2 & 12/2. Plastic Stacking Staples - These Zinc Plated Stacking Staples won't deteriorate. Plastic insulated stacking staples quickly and easily secure vertical stacks of Non-Metallic cable. Electro-Zinc Plated nails provide strength and durability. Smooth saddles prevent damage to insulation. UV-protected Polyethylene saddle resists rot - rust and deterioration. 1/2" wide. white color. UL Listed.
    $6.95
    + -
    91257_l.jpg

    Morris 91257 | Uninsulated Semi-Tension Neutral Service Entrance Splices Model: SNG 24 #2-#4

    102383
    "

    Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4 - These High Conductivity Non-Insulated Service Entrance Splices are perfect for Electrical Service Installations

    Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4 features include:

    • Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductors
    • High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
    • Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound
    • Color Coded and marked with catalog numbers, strip lengths, installing die references and compression locations
    • Common Die Series
    • RUS Approved
    • ANSI C119.4 Compliant
    • Order Qty of 1 = 1 Piece

    Below is more info on our Non-Insulated Semi-Tension Service Entrance Splices Common Die Model: SNG 24 #2-#4

    Non-Insulated Semi-Tension Service Entrance Splices Common Die - These High Conductivity Non-Insulated Service Entrance Splices are perfect for Electrical Service Installations.

    Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductors.

    High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion.

    Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound.

    Color Coded and marked with catalog numbers, strip lengths, installing die references and compression locations.

    Common Die Series.

    RUS Approved.

    ANSI C119.4 Compliant.

    Common Die Series. RUS Approved. ANSI C119.4 Compliant.

    "
    $4.95
    + -
    nsi-sb1808b_fro_00_201412_600x600.jpg

    NSI SB1808-B | Easy-Twist?ó?Ç??ó Crimp Sleeve Copper - 50 Pack

    102767
    "

    18-8 AWG Copper Crimp Sleeve, 500/Bag

    Color: Copper

    Type: Crimp Sleeve Wire Connectors

    Material: Copper

    "
    $28.95
    + -
    abb-52c14.jpg

    T&B 52C14 | Cover 4" square single gang device raised 52C14

    750507
    T018373
    $1.20
    + -
    Picture of WIRE TEW 18AWG WHT SOLD IN SPOOLS OF 300M

    WIRE TEW 18AWG WHT SOLD IN SPOOLS OF 300M

    750138
    WIRE TEW 18AWG WHT 16 STRANDS OF COPPER
    $55.00
    + -
    Filters Close