Search
All Categories
    Menu Close

    Halco

    View as Grid List
    Sort by
    tb_cfl_spiral_wh_3.jpg

    "15W CFL 5000K, Very Cool White Light"

    102055
    "

    Electronic, normal power factor ballast. Minimum start temperature: minus 22 degrees F. Energy Star.

    "
    $4.95
    + -
    hal-83079.jpg

    "Halco T8U2FR12/850/DIR/LED LED T8 1-5/8"" U-Bend 12W 5000K Type A ProLED "

    102112
    "

    Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.UL listed for enclosed fixtures

    Intended Markets: COMMERCIAL

    "
    $27.95
    + -
    100par-blue.jpg

    100PAR/B/85WM - 100W PAR38 Halogen - Energy Saving - Blue Light

    102049
    "

    This Halco BR38BLU100 404113 bulb uses 100 watts and 130 volts. It has a E26 medium base, and an average rated life of 2000 hours. It has a PAR38 lamp shape, and is an incandescent bulb.

    "
    $7.79
    + -
    br30_b.jpg

    Halco - 65W BR30 Incandescent - Flood - Blue Light

    102048
    "

    This Halco BR30BLU65/5 404030 bulb uses 65 watts and 120 volts. It has a E26 medium base, and an average rated life of 2000 hours. It has a BR30 lamp shape, and is an incandescent bulb.

    This Halco 65W incandescent flood provide blue color illumination.

    "
    $3.95
    + -
    76013.jpg

    Halco 76013 A19FR75/RS

    102044

    Intended Markets: Residential, Commercial

    $1.95
    + -
    65026.jpg

    Halco 7613 | 8W PAR36 Screw Terminal 6V

    102040
    "

    Intended Markets: Residential, Commercial

    "
    $5.95
    + -
    6147.jpg

    Halco A15RS60/CS | 60W A15 130V Covershield

    102041
    "

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    76018.jpg

    Halco A19CL60/VS | 60W A19 VS Clear 130V E26 Halco

    102042
    "

    Intended Markets: Residential, Commercial

    "
    $0.95
    + -
    76017.jpg

    Halco A19FR40/VS | 40W A19 VS Frosted 130V E26 Halco

    102043
    "

    Intended Markets: Residential, Commercial

    "
    $0.95
    + -
    80968.jpg

    Halco A19FR9/830/OMNI/LED | A19 9W 3000K Dimmable Omni E26 ProLED

    102045
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Dimmable lamps dim down to 5%, but are limited by the dimming device range.~~~~

    Intended Markets: Residential, Light Commercial

    "
    $6.95
    + -
    6143.jpg

    Halco A19RS100/CS | 100W A19 130V Covershield

    102046
    "

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    halco-91001.jpg

    Halco ADP/E26/GU24 | LOCKING ADAPTER E26 TO GU24

    504121

    This item is a Halco 91001 ADP/E26/GU24.

    Adapter ACCESS LAMP ACCESSORIES.

    $1.95
    + -
    halco-91001.jpg

    Halco ADP/E26/GU24 | LOCKING ADAPTER E26 TO GU24

    106582

    This item is a Halco 91001 ADP/E26/GU24.

    Adapter ACCESS LAMP ACCESSORIES.

    $1.95
    + -
    80094.jpg

    Halco B11CL3/827/LED | LED B11 3W 2700K Dimmable E12 ProLED

    102047
    "

    Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Lamp is UL approved for damp locations.

    Intended Markets: Residential, Commercial

    "
    $9.95
    + -
    404068.jpg

    Halco BR40CL250/1 | 250W BR40 CL 120V Heat 6M PRIS

    102050
    "

    Do not allow hot bulb to come in contact with liquid or metal parts of the fixture, as glass may shatter. Do not use outdoors or operate near flammable materials. Operate in heat-resistant sockets.CAUTION: Do not operate near flammable material. Operate only in heat-resistant sockets. WARNING: Use with care. May cause serious burns. The unattended use of infrared heat by children or incapacitated persons is dangerous. Do not place closer than 18"

    $3.95
    + -
    7050.jpg

    Halco C9CL7 | 7W C9 CL INT 130V Halco

    102051
    "

    Intended Markets: Residential, Commercial

    "
    $0.95
    + -
    Picture of Halco CDM150/T6/830 | 150W CDM T6 G12

    Halco CDM150/T6/830 | 150W CDM T6 G12

    102052

    Lamps classified as E-type are used ONLY in suitably enclosed luminaries. See lamp warning.Operates at 360 watts on 400 watt M59 ballast or M165 ballast.This lamp meets ANSI specifications for T6 tube size as defined by ANSI C78.43-2007; nominal diameter for this item is 0.75

    $32.95
    + -
    67007.jpg

    Halco CDM70/TC/830 | 70W CDM T4 G8.5

    102053
    "

    Lamps classified as E-type are used ONLY in suitably enclosed luminaries. See lamp warning.Operates at 360 watts on 400 watt M59 ballast or M165 ballast.This product contains less than 120 nCi of Kr-85.

    Intended Markets: Residential, Commercial

    "
    $32.95
    + -
    2006.jpg

    Halco CFC40 | 40W Flame CL CAND 130V Halco

    701622
    "

    Operate base down to horizontal.

    Intended Markets: Residential, Commercial

    "
    $0.95
    + -
    2006.jpg

    Halco CFC40 | 40W Flame CL CAND 130V Halco

    106585

    Operate base down to horizontal.

    Intended Markets: Residential, Commercial

    $0.95
    + -
    45071.jpg

    Halco CFL13/27/T2/4PK | 13W T2 2700K MED 4 Pack Prolume

    102054

    UL approved for damp location in base-up position only. All other base positions must be in a dry environment or in a weatherproof fixture.UL approved for totally enclosed fixtures with a max ballast case temperature of 90

    $9.95
    + -
    46101.jpg

    Halco CFL16/30/R30/ES | 16W Spiral R30 3000K MED Prolume

    102056
    "

    Not intended for use with emergency exit fixtures, dimmers, timing devices, photo sensors or occupancy sensors.Do not use where lamp is exposed to moisture.Do not use in totally enclosed fixtures or insulated contact air tight (ICAT) rated fixtures.

    Intended Markets: Residential, Commercial

    "
    $7.95
    + -
    109322.jpg

    Halco F17T8/735/ECO | F17 T8 3500K 78CRI ECO Prolume - 25 Case

    102057
    "

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    "
    $74.95
    + -
    109324.jpg

    Halco F17T8/741/ECO | F17 T8 4100K 78CRI ECO Prolume

    102058

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    $2.99
    + -
    9203.jpg

    Halco F20T12CW | F20 T12 Cool White Prolume

    102059
    "

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    "
    $1.86
    + -
    9235.jpg

    Halco F20T12DL | F20 T12 Daylight Prolume

    102060
    "

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    "
    $2.49
    + -
    109368.jpg

    Halco F28T8/850/ECO | F28 T8 5000K 85CRI ECO Prolume

    106567

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    $3.64
    + -
    109400.jpg

    Halco F32T8/835/ECO | F32 T8 3500K 86CRI ECO Prolume

    106598

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    $2.64
    + -
    109404.jpg

    Halco F32T8/850/ECO | F32 T8 5000K 86CRI ECO Prolume

    102061

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.

    Intended Markets: Residential, Commercial

    $3.59
    + -
    9206.jpg

    Halco F8T5BLB | F8 T5 Blacklight Blue Prolume - 10 Case

    102062
    "

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.Lamp designed for use with Programmed Start ballast.

    Intended Markets: Residential, Commercial

    "
    $35.95
    + -
    9201.jpg

    Halco F8T5CW | F8 T5 Cool White Prolume - 10 Case

    102063
    "

    Average life under specified test conditions with lamps turned off and restarted every three hours. Lamp life is longer if lamps are started less frequently.Lamp designed for use with Programmed Start ballast.

    Intended Markets: Residential, Commercial

    "
    $23.95
    + -
    35321.jpg

    Halco FB28/841/6/ECO | FB28 T8 6 IN U-Bent 4100K 86CRI ECO

    102064
    "

    Intended Markets: Residential, Commercial

    "
    $9.95
    + -
    5207.jpg

    Halco G40CL100 | 100W G40 CL MED 130V Halco

    102065
    "

    Intended Markets: Residential, Commercial

    "
    $3.95
    + -
    5206.jpg

    Halco G40WH100 | 100W G40 WH MED 130V Halco

    102066
    "

    Intended Markets: Residential, Commercial

    "
    $3.95
    + -
    107788.jpg

    Halco HP36NSP20/HX | 20W PAR36 NSP 12VMP-Term Halogen

    102067
    "

    Halogen PAR Caution: Before using bulb, see operating instructions on package. Adhering to these operating instructions will greatly reduce the risk of personal injury or fire. The halogen capsule contained inside this glass bulb operates under pressure, at high temperatures and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or surrounding area, creating a risk of personal injury or fire. Operating Instructions: Turn power off and let lamp cool before replacing or inspecting to avoid electrical shock or burn. For indoor and outdoor use. A weather-protected fixture is recommended for wet locations. Suitable for use in open fixtures. Do not exceed the fixture maximum wattage rating. Do not use if outer glass is scratched or broken. Lamp may continue to operate if outer glass breaks, however immediately discontinue use. Do not use in close proximity to combustible materials.HaloXen lamps operate under high temperatures. To avoid personal injury, turn power off and allow bulb to cool before attempting to handle. Do not use if the glass is scratched or broken. Do not use near flammable or combustible materials.Use only in heat-resistant lamp holders and fixtures rated for reflector or PAR lamps.

    Intended Markets: Residential, Commercial

    "
    $8.95
    + -
    107792.jpg

    Halco HP36WFL20/HX | 20W PAR36 WFL 12VMP-Term Halogen

    102068
    "

    Halogen PAR Caution: Before using bulb, see operating instructions on package. Adhering to these operating instructions will greatly reduce the risk of personal injury or fire. The halogen capsule contained inside this glass bulb operates under pressure, at high temperatures and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or surrounding area, creating a risk of personal injury or fire. Operating Instructions: Turn power off and let lamp cool before replacing or inspecting to avoid electrical shock or burn. For indoor and outdoor use. A weather-protected fixture is recommended for wet locations. Suitable for use in open fixtures. Do not exceed the fixture maximum wattage rating. Do not use if outer glass is scratched or broken. Lamp may continue to operate if outer glass breaks, however immediately discontinue use. Do not use in close proximity to combustible materials.HaloXen lamps operate under high temperatures. To avoid personal injury, turn power off and allow bulb to cool before attempting to handle. Do not use if the glass is scratched or broken. Do not use near flammable or combustible materials.Use only in heat-resistant lamp holders and fixtures rated for reflector or PAR lamps.

    Intended Markets: Residential, Commercial

    "
    $8.95
    + -
    107798.jpg

    Halco HP36WFL35/HX | 35W PAR36 WFL 12VMP-Term Halogen

    102069
    "

    Halogen PAR Caution: Before using bulb, see operating instructions on package. Adhering to these operating instructions will greatly reduce the risk of personal injury or fire. The halogen capsule contained inside this glass bulb operates under pressure, at high temperatures and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or surrounding area, creating a risk of personal injury or fire. Operating Instructions: Turn power off and let lamp cool before replacing or inspecting to avoid electrical shock or burn. For indoor and outdoor use. A weather-protected fixture is recommended for wet locations. Suitable for use in open fixtures. Do not exceed the fixture maximum wattage rating. Do not use if outer glass is scratched or broken. Lamp may continue to operate if outer glass breaks, however immediately discontinue use. Do not use in close proximity to combustible materials.HaloXen lamps operate under high temperatures. To avoid personal injury, turn power off and allow bulb to cool before attempting to handle. Do not use if the glass is scratched or broken. Do not use near flammable or combustible materials.Use only in heat-resistant lamp holders and fixtures rated for reflector or PAR lamps.

    Intended Markets: Residential, Commercial

    "
    $8.95
    + -
    70346.jpg

    Halco HP38FL70/S/HX | 70W PAR38 FL 120V E26 SilverHalogen

    102070
    "

    Halogen PAR Caution: Before using bulb, see operating instructions on package. Adhering to these operating instructions will greatly reduce the risk of personal injury or fire. The halogen capsule contained inside this glass bulb operates under pressure, at high temperatures and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or surrounding area, creating a risk of personal injury or fire. Operating Instructions: Turn power off and let lamp cool before replacing or inspecting to avoid electrical shock or burn. For indoor and outdoor use. A weather-protected fixture is recommended for wet locations. Suitable for use in open fixtures. Do not exceed the fixture maximum wattage rating. Do not use if outer glass is scratched or broken. Lamp may continue to operate if outer glass breaks, however immediately discontinue use. Do not use in close proximity to combustible materials.HaloXen lamps operate under high temperatures. To avoid personal injury, turn power off and allow bulb to cool before attempting to handle. Do not use if the glass is scratched or broken. Do not use near flammable or combustible materials.Use only in heat-resistant lamp holders and fixtures rated for reflector or PAR lamps.

    Intended Markets: Residential, Commercial

    "
    $5.95
    + -
    hal-81108.jpg

    Halco JC20/2WW/LED2 | LED JC G4 Base - 20W Equal - 3000K

    102071

    Intended Markets:

    $21.95
    + -
    hal-80830.jpg

    Halco JC35/4WW/LED | LED JC GY6.35 - 4.5W - 35W Equal

    102072
    "

    Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Approved for use in sealed metal landscape fixtures.

    Intended Markets: Residential, Commercial

    "
    $26.95
    + -
    147012.jpg

    Halco JC35/BA15D | 35W JC 12V BA15D Prism

    102073
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    107714.jpg

    Halco JC35/HX | 35W JC 12V GY6.35 PRM Halogen

    102074
    "

    HaloXen lamps operate under high temperatures. To avoid personal injury, turn power off and allow bulb to cool before attempting to handle. Do not use if the glass is scratched or broken. Do not use near flammable or combustible materials.Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    107014.jpg

    Halco JC50 | 50W JC 12V G6.35 Prism

    102075
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $0.91
    + -
    107015.jpg

    Halco JCD50 | 50W JC 130V GY6.35 Prism

    102076
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    108204.jpg

    Halco MH250/U | 250W MH ED28 Mogul Prolume

    102077
    "

    Lamps classified as E-type are used ONLY in suitably enclosed luminaries. See lamp warning.Color characteristics may vary somewhat from one lamp to another. Time should be allowed for lamp to stabilize in color when it is turned on for the first time or if for any reason its operating position is changed. This may require several hours of operation, with more than one start. Lamp color and output may change temporarily if the lamp is subjected to excess vibration or shock. Lamp color characteristics may change after long accumulated operating time.Requires ballast that is designed to operate all popular brands of Metal Halide lamps. 1000W types will operate from H36 conventional lag type ballast for Mercury Vapor lamps at ambient temperatures of 50"

    $13.95
    + -
    108288.jpg

    Halco MP250/BU | 250W MP ED28 EX39 BU Prolume

    102078
    "

    Lamps classified as O-type comply with ANSI standard C78.387 for containment testing and may be used in open luminaries. See lamp warning.Color characteristics may vary somewhat from one lamp to another. Time should be allowed for lamp to stabilize in color when it is turned on for the first time or if for any reason its operating position is changed. This may require several hours of operation, with more than one start. Lamp color and output may change temporarily if the lamp is subjected to excess vibration or shock. Lamp color characteristics may change after long accumulated operating time. Performance may not be satisfactory unless operated within specified operating positions.Requires ballast that is designed to operate all popular brands of Metal Halide lamps. 1000W types will operate from H36 conventional lag type ballast for Mercury Vapor lamps at ambient temperatures of 50"

    $17.95
    + -
    81093.jpg

    Halco MR11FTD/827/LED | LED MR11 3W 30DEG 2700K GU4 ProLED

    102079
    "

    This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Approved for use in sealed metal landscape fixtures.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Rated for indoor use only.

    Intended Markets: Landscape, Commercial, Residential, Hospitality

    "
    $23.95
    + -
    81063.jpg

    Halco MR16BAB/850/LED | LED MR16 4W 40DEG 5000K GU5.3 ProLED

    102080
    "

    This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Approved for use in sealed metal landscape fixtures.Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Lamp is UL approved for damp locations.

    Intended Markets: Landscape

    "
    $21.95
    + -
    107122.jpg

    Halco MR16ESX/SC | 20W MR16 NSP 12V GU5.3 Prism

    102081
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    81084.jpg

    Halco MR16WFL35/830/LED | LED MR16 4.5W 60DEG 3000K GU5.3 ProLED

    102082
    "

    This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Approved for use in sealed metal landscape fixtures.Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Lamp is UL approved for damp locations.~

    Intended Markets: Landscape

    "
    $25.95
    + -
    108610.jpg

    Halco MR8W20/L | 20W MR8 WFL Lens 12V GU4 Prism

    102083
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    108350.jpg

    Halco MV100DX/R40 | 100W MV R40 MED Prolume

    200229

    It is a characteristic of phosphor-coated vapor lamps to require a few hundred hours of operation to gradually reach normal characteristic color. New lamps may have a slight pink appearance during this initial operation period.

    Intended Markets: Residential, Commercial

    $12.95
    + -
    82006.jpg

    Halco PAR20FL7/927/W/LED | LED PAR20 7W 2700K Dimmable 40

    102084
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesIP65 Rated "

    $14.95
    + -
    82010.jpg

    Halco PAR20FL7/940/W/LED | LED PAR20 7W 4000K Dimmable 40

    102085
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesIP65 Rated "

    $14.95
    + -
    82016.jpg

    Halco PAR30FL10L/940/W/LED | LED PAR30L 10W 4000K Dimmable

    102086
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesIP65 Rated "

    $20.95
    + -
    82035.jpg

    Halco PAR30NFL10S/930/B/LED | LED PAR30S 10W 3000K Dimmable

    102087
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesIP65 Rated "

    $20.95
    + -
    81075.jpg

    Halco PAR36WFL6/827/IP67/LED | LED PAR36 6.5W 2700K Dimmable 32 DEG

    102088
    "

    This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.IP67 Rated - This lamp is rated for use outdoors where exposed directly to water and protected from the effects of temporary immersion in water to depth between 5.9"

    $57.95
    + -
    82047.jpg

    Halco PAR38FL17/927/B/LED | LED PAR38 17W 2700K Dimmable 4

    102089
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesIP65 Rated "

    $24.95
    + -
    halco-99816.jpg

    Halco PCS/277V | PHOTOCELL Swivel 208-277V

    102090

    This item is a Halco 99816 PCS/277V.

    Outdoor LED-Accessories ICFIXTUR LED Fixtures.

    $19.95
    + -
    109146.jpg

    Halco PL13D/27/ECO | 13W Double 2700K GX23-2 PRO ECO

    301321

    Total wattage consumption for adapter systems is higher than lamp wattage due to ballast losses. Total system wattage equals lamp wattage plus 2 ballast watts.

    Intended Markets: Residential, Commercial

    $2.95
    + -
    109146.jpg

    Halco PL13D/27/ECO | 13W Double 2700K GX23-2 PRO ECO

    106644

    Total wattage consumption for adapter systems is higher than lamp wattage due to ballast losses. Total system wattage equals lamp wattage plus 2 ballast watts.

    Intended Markets: Residential, Commercial

    $2.95
    + -
    109126.jpg

    Halco PL13S/27/ECO | 13W Single 2700K GX23 Prolume ECO

    102091
    "

    Total wattage consumption for adapter systems is higher than lamp wattage due to ballast losses. Total system wattage equals lamp wattage plus 2 ballast watts.

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    hal-81113.jpg

    Halco PL13V/841/4P/LED | LED Plug-In Vertical 13W 4100K Dimmable Ballast Compatible G24Q ProLED

    102092
    "

    Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.~~~~~~

    Intended Markets: Commercial, Retail, Hospitality

    "
    $25.95
    + -
    hal-81114.jpg

    Halco PL13V/850/4P/LED | LED Plug-In Vertical 13W 5000K Dimmable Ballast Compatible G24Q ProLED

    106645

    Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.~~~~~`

    Intended Markets: Commercial, Retail, Hospitality

    $25.95
    + -
    44801.jpg

    Halco PL18T/E/35/ECO | 18W Triple 3500K GX24q-2 Prolume EC

    102093
    "

    This 4-Pin Electronic lamp has an internal end-of-life (EOL) mechanism that shuts the lamp down to prevent abnormal end-of-life failure.Operate this lamp on a high-frequency Compact Fluorescent ballast with an end-of-life shut down circuit.

    Intended Markets: Residential, Commercial

    "
    $3.95
    + -
    109868.jpg

    Halco PL28D/50 | 28W Double 5000K GX32D-3 PRO - 10 Case

    102094
    "

    Total wattage consumption for adapter systems is higher than lamp wattage due to ballast losses. Total system wattage equals lamp wattage plus 2 ballast watts.

    Intended Markets: Residential, Commercial

    "
    $79.95
    + -
    109070.jpg

    Halco PL32T/E/50/ECO | 32W Triple 5000K GX24Q-3 PRO ECO

    102095
    "

    This 4-Pin Electronic lamp has an internal end-of-life (EOL) mechanism that shuts the lamp down to prevent abnormal end-of-life failure.Operate this lamp on a high-frequency Compact Fluorescent ballast with an end-of-life shut down circuit.

    Intended Markets: Residential, Commercial

    "
    $4.95
    + -
    109700.jpg

    Halco PLL18/835/ECO | 18W Long 3500K 2G11 Prolume

    102096

    Operate this lamp on a high-frequency Compact Fluorescent ballast with an end-of-life shut down circuit.

    Intended Markets: Residential, Commercial

    $5.95
    + -
    109702.jpg

    Halco PLL18/841/ECO | 18W Long 4100K 2G11 Prolume - 10 Case

    102097
    "

    Operate this lamp on a high-frequency Compact Fluorescent ballast with an end-of-life shut down circuit.

    Intended Markets: Residential, Commercial

    "
    $57.95
    + -
    109714.jpg

    Halco PLL40/835/RS/ECO | 40W Long 3500K RS 2G11 Prolume

    102535

    Operate this lamp on a high-frequency Compact Fluorescent ballast with an end-of-life shut down circuit.

    Intended Markets: Residential, Commercial

    $7.00
    + -
    107024.jpg

    Halco Q100CL/MC | 130V 100W T4 E11 Prism

    102098
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    127024.jpg

    Halco Q100CL/MC/120 | 120V 100W T4 E11 Prism

    102099
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    71102.jpg

    Halco Q150CL/DC/120 | ETC 120V 150W T4 BA15D

    102100
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    107188.jpg

    Halco Q150T3C/S | 130V 150W T3 CL R7s Prism 78MM

    102101
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.Use outdoors only in enclosed fixtures or where lamp is protected from exposure to water. Use only in fixtures rated for this product.Operate in a horizontal position only.

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    127032.jpg

    Halco Q250CL/MC/120 | EHT 120V 250W T4 E11 Prism

    102102
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    107216.jpg

    Halco Q250T3C/83MM | 130V 250W T3 CL R7s Halco 83MM

    102103
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.Use outdoors only in enclosed fixtures or where lamp is protected from exposure to water. Use only in fixtures rated for this product.Operate in a horizontal position only.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    107208.jpg

    Halco Q250T3C/S | 130V 250W T3 CL R7s Prism 78MM

    102104
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.Use outdoors only in enclosed fixtures or where lamp is protected from exposure to water. Use only in fixtures rated for this product.Operate in a horizontal position only.

    Intended Markets: Residential, Commercial

    "
    $1.86
    + -
    107194.jpg

    Halco Q300T3C | 130V 300W T3 CL R7s Prism

    102105
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.Use outdoors only in enclosed fixtures or where lamp is protected from exposure to water. Use only in fixtures rated for this product.Operate in a horizontal position only.

    Intended Markets: Residential, Commercial

    "
    $1.95
    + -
    107018.jpg

    Halco Q50CL/DC | 130V 50W T4 BA15D Prism

    102106
    "

    Do not touch capsule with bare hands. Oil from the skin may reduce performance unless wiped clean with alcohol and a soft cloth. CAUTION: THIS LAMP OPERATES UNDER PRESSURE AND COULD SHATTER. To avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture with a protective shield or tempered glass. Provide adequate ventilation to avoid overheating and use in only fixtures rated for wattage stated on the package. To avoid risks of burns or other injury, turn power off and allow lamp to cool before replacing. Socket condition may affect lamp life. Inspect and replace socket if deterioration occurs.

    Intended Markets: Residential, Commercial

    "
    $2.95
    + -
    9116.jpg

    Halco R20FL100/S | 100W R20 FL 125V Halco SHORT

    102107
    "

    Intended Markets: Residential, Commercial

    "
    $1.86
    + -
    80989.jpg

    Halco R20FL6/827/LED | LED R20 6.5W 2700K Dimmable E26 ProLED

    102108
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesLamp is UL approved for damp locations.

    Intended Markets: Residential, Commercial

    "
    $9.46
    + -
    80986.jpg

    Halco R20FL6/830/LED | LED R20 6.5W 3000K Dimmable E26 ProLED

    102109
    "

    Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photosensors,digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside.To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved.Do not use where directly exposed to water.Dimmable lamps dim down to 5%, but are limited by the dimming device range.Not for use in totally enclosed fixtures.Acceptable for use in insulated contact airtight (ICAT) rated fixturesLamp is UL approved for damp locations.

    Intended Markets: Residential, Commercial

    "
    $9.95
    + -
    9051.jpg

    Halco S14CL11 | 11W S14 CL 130V Halco

    102110
    "

    Intended Markets: Residential, Commercial

    "
    $0.95
    + -
    9039.jpg

    Halco T7CL15CAN | 15W T7 CL CAND 120V Halco

    102111
    "

    Intended Markets: Residential, Commercial

    "
    $0.91
    + -
    Filters Close